=46rom memory I thought there was a separate CD for a D box only version of I/A at 6.1 (or 6.1.1). Is this the one that you installed? Later versions combined it back into the general Day 0 release. Kevin Niederberger -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of Jack Easley Sent: Thursday, 10 March 2005 4:38 p.m. To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] WP51D Stand-alone It will boot up with the DNBT in your test rack. The AP is not required, although you will get an error message on the top bar of the display manager about an rmount pending. No bigee as far as testing goes. Jack Easley -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Burnham, Rob C. Sent: Wednesday, March 09, 2005 10:45 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] WP51D Stand-alone I did the Commit and the Release Update to 6.1.1 and then Reboot, won't boot now. I don't have the DNBT yet. I have a 8 slot rack, so I will power up the DNBT when I get it. I hope it doesn't have to find the Host. Thanks Jack -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of Jack Easley Sent: Tuesday, March 08, 2005 9:12 PM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] WP51D Stand-alone Shazam! I had the same experience at the end of my workday. It's been a y=3D ear or so since I installed a WP51D, so I don't remember if it must be connec=3D ted to the DNBT to reboot after committal at Version 6.1. Yes, there is a set_letterbug tool in /usr/local, which I used prior to my committal, so there is no help there. I am going to connect this beast to it's DNBT first thing in the morning. However, I do know for a fact that a WP51D at Version 6.1.2 will boot standalone, as this one was running standalone this morning prior to the hard-drive replacement. My guess is that the WP51D boot standalone thing =3D may work after a 6.1.1 or 6.1.2 revision level upgrade, or not : )=3D20 -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] =3D On Behalf Of Burnham, Rob C. Sent: Tuesday, March 08, 2005 1:42 PM To: Foxboro free list (E-mail) Subject: [foxboro] WP51D Stand-alone I have a WP51D at 6.1, new hard drive. It will eventually be connected to a DNBT and a nodebus. Currently not connected. After I run the COMMIT and reboot, I get: "Configuring Network Interfaces: Program Terminated" My failing memory has a recall of setting up a WP51D off-line and then taking it to its final resting place, plugging it in and away we go. Was this just a dream? Thanks List! Rob Burnham Systems Engineer Glatfelter <http://www.glatfelter.com> Phone 920-727-2426 Fax 920-727-2638 rburnham@xxxxxxxxxxxxxx Beyond Paper... is everything we do above and beyond making great paper - that makes=3D =3D3D us unique =3D20 =3D20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html =3D20 foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djoin to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dleave =3D20 =3D20 =3D20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html =3D20 foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djoin to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dleave =3D20 =20 =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html =20 foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave =20 =20 =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html =20 foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave =20 EOM=0A=0ANOTICE - This message and any attached files may contain informa= tion that is confidential and/or subject of legal privilege intended only= for use by the intended recipient. If you are not the intended recipient= or the person responsible for delivering the message to the intended rec= ipient, be advised that you have received this message in error and that = any dissemination, copying or use of this message or attachment is strict= ly forbidden, as is the disclosure of the information therein. If you hav= e received this message in error please notify the sender immediately and= delete the message. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave