Re: [foxboro] Switch from text editor back to vi?
- From: "Johnson, Alex P \(IPS\)" <alex.johnson@xxxxxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Tue, 13 Feb 2007 09:18:08 -0500
That does read like something that I wrote. :)
I believe it is still correct. I can add that the change for V7.x is
simple.=20
Change this line in /opt/fox/ciocfg/remote_edit
=09EDITOR=3D/usr/openwin/bin/textedit
to
=09EDITOR=3D/usr/bin/vi
Regards,
=20
Alex Johnson
Invensys Systems, Inc.
10900 Equity Drive
Houston, TX 77041
713.329.8472 (voice)
713.329.1700 (fax)
713.329.1600 (switchboard)
alex.johnson@xxxxxxxxxxxxxxxx
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Weiss, Andreas
Sent: Tuesday, February 13, 2007 8:10 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Switch from text editor back to vi?
> We installed an AW51F running ver. 7.0, and when editing=3D20
> sequence code, the text editor is launched instead of vi. Is=3D20
> there a setting somewhere that can be changed, making the ICC=3D20
> use the vi editor again?
Hi Ken,
some lines copied out of my knowledge base. I think that these sentences
are written by Alex but I don't know.
In V6.x systems, the file /opt/fox/ciocfg/seqedit is the script that is
run
when the 'Edit sequence code' is picked. You can edit it to run the
editor
that you wish.
In V7.x systems, the file is /opt/fox/ciocfg/remote_edit. I suspect that
if
you work with it you can do what you want though I never have. Be sure
to
make a backup. :)
I'd be tempted to add the following after the first line:
exec >/opt/fox/ciocfg/remote_edit.log 2>&1
set -x
and review the log file that is created during your testing.
Regards,
Andreas
=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
Confidentiality Notice: =0AThe information contained in this electronic m=
essage and any attachment(s) to this message are intended for the exclusi=
ve use of the recipient(s) and may contain confidential, privileged or pr=
oprietary information. If you are not the intended recipient, please noti=
fy the sender immediately, delete all copies of this message and any atta=
chment(s). Any other use of the E-Mail by you is prohibited.=0A
=0AConfidentiality Notice: =0AThe information contained in this electroni=
c message and any attachment(s) to this message are intended for the excl=
usive use of the recipient(s) and may contain confidential, privileged or=
proprietary information. If you are not the intended recipient, please n=
otify the sender immediately, delete all copies of this message and any a=
ttachment(s). Any other use of the E-Mail by you is prohibited.=0A
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
