The ramp rate is different for the two ramp buttons. What bumps to you get with each of the two buttons? Regards, =20 Alex Johnson Invensys Process Systems Invensys Systems, Inc. 10707 Haddington Houston, TX 77043 713.722.2859 (voice) 713.722.2700 (switchboard) 713.932.0222 (fax) ajohnson@xxxxxxxxxxx -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx = [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of IQUEIROLOO@xxxxxxxxxxxxx Sent: Wednesday, January 12, 2005 10:51 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] Ramp Question I supposed that, but in my application I have a percent control range = of 5.0 and when I pick the ramp the variable goes 0.5 from the last value. If = the DM assumed this percentage (5.0) of the 0-100 span, I think that the variable would move 5.0 not 0.5 from the last value because is the 5 = percent of 100. Am I right? =20 Regards, =20 Ignacio Queirolo Olivera Control Avanzado Complejo Industrial Ensenada Repsol YPF - Qu=EDmica Tel.: 54 221 429-8400 ext. 26481 Fax: 54 221 429-8400 ext. 26209 iqueiroloo@xxxxxxxxxxxxx <mailto:iqueiroloo@xxxxxxxxxxxxx>=20 =20 Re: [foxboro] Ramp Question * From: "Johnson, Alex (Foxboro)" <ajohnson@xxxxxxxxxxx>=20 * To: foxboro@xxxxxxxxxxxxx=20 * Date: Tue, 11 Jan 2005 15:56:14 -0500=20 The Rxy parameters are OM objects that contain 3 floating point values. =20 Rxy[0] - High scale - HSCxy Rxy[1] - Low scale - LSCxy Rxy[2] - Change Delta - DELTxy =20 The DM/FV is smart enough to set the big (double arrow) and small =3D (single arrow) ramp buttons to a percentage of the span IF the Rxy parameter is specified on the tag name, e.g.,=3D20 =20 C:B.SPT|RI1 =20 Might be used for a PIDA block setpoint ramp. =20 =20 If the Rxy parameter is not specified, 0-100 is assumed and the RAMP = =3D buttons will use a percentage of that span. =20 =20 Does this help? =20 Regards, =3D20 Alex Johnson Invensys Process Systems Invensys Systems, Inc. 10707 Haddington Houston, TX 77043 713.722.2859 (voice) 713.722.2700 (switchboard) 713.932.0222 (fax) ajohnson@xxxxxxxxxxx =20 =20 AVISO LEGAL: Esta informaci=F3n es privada y confidencial y est=E1 dirigida = =FAnicamente a su destinatario. Si usted no es el destinatario original de este mensaje y = por este medio pudo acceder a dicha informaci=F3n por favor elimine el = mensaje. La distribuci=F3n o copia de este mensaje est=E1 estrictamente prohibida. = Esta comunicaci=F3n es s=F3lo para prop=F3sitos de informaci=F3n y no debe = ser considerada como propuesta, aceptaci=F3n ni como una declaraci=F3n de = voluntad oficial de REPSOL YPF S.A. y/o subsidiarias y/o afiliadas. La = transmisi=F3n de e-mails no garantiza que el correo electr=F3nico sea seguro o libre de = error. Por consiguiente, no manifestamos que esta informaci=F3n sea completa o precisa. Toda informaci=F3n est=E1 sujeta a alterarse sin previo aviso. = This information is private and confidential and intended for the = recipient only. If you are not the intended recipient of this message you are = hereby notified that any review, dissemination, distribution or copying of = this message is strictly prohibited. This communication is for information purposes only and shall not be regarded neither as a proposal, = acceptance nor as a statement of will or official statement from REPSOL YPF S.A. = and/or subsidiaries and/or affiliates. Email transmission cannot be guaranteed = to be secure or error-free. Therefore, we do not represent that this information is complete or accurate and it should not be relied upon as such. All information is subject to change without notice. =20 =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html =20 foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin to unsubscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave