I am using a button made with a rectangle in Display Builder. Then I configured the select action ramp with the following line: C:B.SPT Protection Class: 0 +/- percent control range: 5 When I pick the ramp the value moves 0,5 from the last value. If the DM assumed 5 percent of the 0-100 span, I think that the variable would move 5 not 0,5 from the last value. Am I right? Regards, Ignacio Queirolo Olivera Control Avanzado Complejo Industrial Ensenada Repsol YPF - Química Tel.: 54 221 429-8400 ext. 26481 Fax: 54 221 429-8400 ext. 26209 iqueiroloo@xxxxxxxxxxxxx <mailto:iqueiroloo@xxxxxxxxxxxxx> Re: [foxboro] Ramp Question * From: "Johnson, Alex (Foxboro)" <ajohnson@xxxxxxxxxxx> * To: foxboro@xxxxxxxxxxxxx * Date: Wed, 12 Jan 2005 12:03:33 -0500 The ramp rate is different for the two ramp buttons. What bumps to you get with each of the two buttons? Regards, =20 Alex Johnson Invensys Process Systems Invensys Systems, Inc. 10707 Haddington Houston, TX 77043 713.722.2859 (voice) 713.722.2700 (switchboard) 713.932.0222 (fax) ajohnson@xxxxxxxxxxx AVISO LEGAL: Esta información es privada y confidencial y está dirigida únicamente a su destinatario. Si usted no es el destinatario original de este mensaje y por este medio pudo acceder a dicha información por favor elimine el mensaje. La distribución o copia de este mensaje está estrictamente prohibida. Esta comunicación es sólo para propósitos de información y no debe ser considerada como propuesta, aceptación ni como una declaración de voluntad oficial de REPSOL YPF S.A. y/o subsidiarias y/o afiliadas. La transmisión de e-mails no garantiza que el correo electrónico sea seguro o libre de error. Por consiguiente, no manifestamos que esta información sea completa o precisa. Toda información está sujeta a alterarse sin previo aviso. This information is private and confidential and intended for the recipient only. If you are not the intended recipient of this message you are hereby notified that any review, dissemination, distribution or copying of this message is strictly prohibited. This communication is for information purposes only and shall not be regarded neither as a proposal, acceptance nor as a statement of will or official statement from REPSOL YPF S.A. and/or subsidiaries and/or affiliates. Email transmission cannot be guaranteed to be secure or error-free. Therefore, we do not represent that this information is complete or accurate and it should not be relied upon as such. All information is subject to change without notice. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave