I'd buy more DM licenses; these are fairly cheap. Then, distribute the licenses on the workstations, adding a 2nd Ethernet card where necessary. Jim -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of BrianLong Sent: Wednesday, March 16, 2005 1:48 PM To: Foxboro Subject: [foxboro] Op panel part 2 Something I should have mentioned is that I have about 11 op panel's to replace. Most are very simple with just a couple analogs, inc/dec's, start/ stops. I don't have that many display managers available nor would I want to tie them up for a few points. Any other idea's? Thanks, Brian Long Arkansas Kraft _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave