Re: [foxboro] Modbus Integrator 30 communication parameters
- From: "Moore, Kenneth, Celanese/US" <ken.e.moore@xxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Tue, 23 Nov 2010 14:28:36 -0600
Found it,
NRBUS= NUMBER OF ACTIVE PORTS
BUSOPT= Modbus address
BUSTYP= NUMBER OF RETRIES
PIOWDT= MAXIMUM SECONDS TO RESPOND TO A COMMAND
MPOLL= NOT USED ALWAYS 7
BAUD= 3 (3200)
DATBIT= 8 (DATA BITS)
PARITY= 2 (2=EVEN)
STPBIT= 1 (STOP BITS)
Thanks,
Ken
From: Moore, Kenneth, Celanese/US
Sent: Tuesday, November 23, 2010 3:01 PM
To: 'foxboro@xxxxxxxxxxxxx'
Subject: Modbus Integrator 30 communication parameters
Hi folks,
I cannot put my hands on my integrator references at the moment, can
anyone decipher the settings in the primary ECB and tell me how it's
setup.
We are planning on replacing the current PLC with another device and I
want to preset the communication settings.
Here are the ECB parameters:
COMPND
BLOCK
TYPE
DESCRP
NRBUS
BUSOPT
BUSTYP
PIOWDT
MPOLL
BAUD
DATBIT
PARITY
STPBIT
MG30GW_ECB
PRIMARY_ECB
ECBPG
1
1
3
3
7
3
8
2
1
Regards,
Ken Moore
Process Controls Specialist
Celanese
NOTE: The information transmitted is intended only for the person or
entity to which it is addressed and may contain confidential and/or
privileged material. Any review, retransmission, dissemination or other
use
of, or taking of any action in reliance upon this information by persons
or entities other than the intended recipient is prohibited. If you
received this in error, please contact the sender and delete the
material from any computer.
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
