Re: [foxboro] Modbus Integrator 30 communication parameters
- From: "Wilson, Brad" <brad.wilson@xxxxxxxxxxxx>
- To: "foxboro@xxxxxxxxxxxxx" <foxboro@xxxxxxxxxxxxx>
- Date: Tue, 23 Nov 2010 16:19:18 -0500
BAUD of 3 is 19200
Brad Wilson
Invensys Operations Management
NA Northeast Service
SAMREF Project Team
________________________________________
From: foxboro-bounce@xxxxxxxxxxxxx [foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of
Brown, Stanley [stan.brown@xxxxxxxxxxxxxxxxx]
Sent: Tuesday, November 23, 2010 1:01 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Modbus Integrator 30 communication parameters
That is a mighty strange baud rate.
Sent from my iPhone
On Nov 23, 2010, at 15:33, "Moore, Kenneth, Celanese/US"
<ken.e.moore@xxxxxxxxxxxx
> wrote:
> Found it,
>
>
> NRBUS= NUMBER OF ACTIVE PORTS
>
> BUSOPT= Modbus address
>
> BUSTYP= NUMBER OF RETRIES
>
> PIOWDT= MAXIMUM SECONDS TO RESPOND TO A COMMAND
>
> MPOLL= NOT USED ALWAYS 7
>
> BAUD= 3 (3?200)
>
> DATBIT= 8 (DATA BITS)
>
> PARITY= 2 (2=EVEN)
>
> STPBIT= 1 (STOP BITS)
>
>
>
>
>
>
>
>
>
> Thanks,
>
> Ken
>
>
>
> From: Moore, Kenneth, Celanese/US
> Sent: Tuesday, November 23, 2010 3:01 PM
> To: 'foxboro@xxxxxxxxxxxxx'
> Subject: Modbus Integrator 30 communication parameters
>
>
>
> Hi folks,
>
>
>
> I cannot put my hands on my integrator references at the moment, can
> anyone decipher the settings in the primary ECB and tell me how it's
> setup.
>
>
>
> We are planning on replacing the current PLC with another device and I
> want to preset the communication settings.
>
>
>
> Here are the ECB parameters:
>
>
>
> COMPND
>
> BLOCK
>
> TYPE
>
> DESCRP
>
> NRBUS
>
> BUSOPT
>
> BUSTYP
>
> PIOWDT
>
> MPOLL
>
> BAUD
>
> DATBIT
>
> PARITY
>
> STPBIT
>
> MG30GW_ECB
>
> PRIMARY_ECB
>
> ECBPG
>
> 1
>
> 1
>
> 3
>
> 3
>
> 7
>
> 3
>
> 8
>
> 2
>
> 1
>
>
>
>
>
>
>
>
>
>
>
> Regards,
>
> Ken Moore
>
> Process Controls Specialist
> Celanese
>
> NOTE: The information transmitted is intended only for the person or
> entity to which it is addressed and may contain confidential and/or
> privileged material. Any review, retransmission, dissemination or
> other
> use
> of, or taking of any action in reliance upon this information by
> persons
> or entities other than the intended recipient is prohibited. If you
> received this in error, please contact the sender and delete the
> material from any computer.
>
>
>
>
>
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys
> Process
> Systems (formerly The Foxboro Company). Use the info you obtain here
> at
> your own risks. Read http://www.thecassandraproject.org/
> disclaimer.html
>
> foxboro mailing list: //www.freelists.org/list/
> foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?
> subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?
> subject=leave
>
>
The information contained in this message and any attached files may be
privileged and/or confidential and protected from disclosure. If you are not
the intended recipient, any disclosure, copying, distribution or use of any of
the information contained in or attached to this transmission is strictly
prohibited. If you have received this transmission in error, please so notify
the sender immediately without reading it. Also, please promptly destroy the
original transmission and its attachments. Any views or opinions presented in
this message or attachments are those of the author and do not necessarily
represent those of KapStone Paper and Packaging Corporation or its subsidiaries.
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
*** Confidentiality Notice: This e-mail, including any associated or attached
files, is intended solely for the individual or entity to which it is
addressed. This e-mail is confidential and may well also be legally privileged.
If you have received it in error, you are on notice of its status. Please
notify the sender immediately by reply e-mail and then delete this message from
your system. Please do not copy it or use it for any purposes, or disclose its
contents to any other person. This email comes from a division of the Invensys
Group, owned by Invensys plc, which is a company registered in England and
Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X
7AW (Registered number 166023). For a list of European legal entities within
the Invensys Group, please go to
http://www.invensys.com/legal/default.asp?top_nav_id=77&nav_id=80&prev_id=77.
You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail
reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject
to the terms of any agreements between Invensys (and/or its subsidiaries and
affiliates) and the recipient (and/or its subsidiaries and affiliates).
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
