Re: [foxboro] Hardware Software Mismatch
- From: "Abdulwahed, Omar T" <omar.abdulwahed@xxxxxxxxxx>
- To: "foxboro@xxxxxxxxxxxxx" <foxboro@xxxxxxxxxxxxx>
- Date: Mon, 13 Aug 2012 06:22:52 +0000
We have I/A V6.2
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Boulay, Russ
Sent: Wednesday, August 08, 2012 5:03 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Hardware Software Mismatch
What version of I/A ?
B style modules became supported at V6.2
The timing of the B style module release however occurred when many users were
at V6.1.1 If at 6.1.1 only, you wanted to boot a B in place of an A you had to
install a special romload_svr and have the OS1M3B image on the host AW.
The romload_srvr would then identify module type (A or B) and boot the module
with its' proper OS.
All versions after 6.1.1, the sysdef capability then allowed the 30B to be
configured as a B and the stated process is not needed.
So if you have a 30B configured as a 30A....and expect it to boot.....then the
host AW needs the OS1M3B image loaded on the host.
If you are at IA 6.1.1, you would also need a special romload_svr which was
only available in a mini kit.
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Abdulwahed, Omar T
Sent: Wednesday, August 08, 2012 12:29 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Hardware Software Mismatch
Greetings Ladies and Gentlemen,
We have a failed gateway that we are trying to replace. When trying to install
another GW30B, it didn't work. When we checked the system monitor, it showed us
GW30A. In other words, we have a mismatch. The GW is physically 30B but has
been configured as 30A. I would appreciate any assistance in how to resolve
this issue.
Regards,
Omar Alabdulwahed
DCS Engineer
Uthmaniyah Gas Plant
________________________________
The contents of this email, including all related responses, files and
attachments transmitted with it (collectively referred to as "this Email"), are
intended solely for the use of the individual/entity to whom/which they are
addressed, and may contain confidential and/or legally privileged information.
This Email may not be disclosed or forwarded to anyone else without
authorization from the originator of this Email. If you have received this
Email in error, please notify the sender immediately and delete all copies from
your system. Please note that the views or opinions presented in this Email are
those of the author and may not necessarily represent those of Saudi Aramco.
The recipient should check this Email and any attachments for the presence of
any viruses. Saudi Aramco accepts no liability for any damage caused by any
virus/error transmitted by this Email.
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process Systems
(formerly The Foxboro Company). Use the info you obtain here at your own risks.
Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
*** Confidentiality Notice: This e-mail, including any associated or attached
files, is intended solely for the individual or entity to which it is
addressed. This e-mail is confidential and may well also be legally privileged.
If you have received it in error, you are on notice of its status. Please
notify the sender immediately by reply e-mail and then delete this message from
your system. Please do not copy it or use it for any purposes, or disclose its
contents to any other person. This email comes from a division of the Invensys
Group, owned by Invensys plc, which is a company registered in England and
Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X
7AW (Registered number 166023). For a list of European legal entities within
the Invensys Group, please go to http://www.invensys.com/en/legal/default.aspx.
You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail
reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject
to the terms of any agreements between Invensys (and/or its subsidiaries and
affiliates) and the recipient (and/or its subsidiaries and affiliates).
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process Systems
(formerly The Foxboro Company). Use the info you obtain here at your own risks.
Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
