We show the TIMER.TIMR1V parameter on the screen when the timer is activated, it's in seconds offcourse. If you need minutes use a calc or do the math in the sequence like Mike says. Rgds, Dirk -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of mike.stewart@xxxxxxxxxxxxxx Sent: dinsdag 22 mei 2007 15:25 To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] Displaying time left on a timer Sorry for the brain fart a while ago. Let's try this again. Jeff, Try this: SN0001:=3D3D"your message here ",ROUND(RO0001)," MINUTES remaining"; I set RO0001 equal to RI0001 in the sequence code. The message and time is updated each time the sequence is processed. You have to do the math to get it to minutes in the sequence code as the timer is in seconds. Mike Stewart Jr. Control Systems Support Automation/Simulation Specialist Carrollton Site=3D20 Dow Corning Corporation -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Jeff Hurt Sent: Tuesday, May 22, 2007 8:06 AM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] Displaying time left on a timer Is there anyway to display the time left when using a timer or when using a WAIT command? Thanks in advance for your help. Jeff Hurt =3D20 =20 =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html =20 foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin to unsubscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave