Use a negative time, then it is a count down timer. For WAIT command, use a For loop and intialize it with a bein time, and the decrement time is negative. joe wu ----- Original Message ---- From: Jeff Hurt <thehurtman@xxxxxxxxx> To: foxboro@xxxxxxxxxxxxx Sent: Tuesday, May 22, 2007 7:05:45 AM Subject: [foxboro] Displaying time left on a timer Is there anyway to display the time left when using a timer or when using a WAIT command? Thanks in advance for your help. Jeff Hurt _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave ____________________________________________________________________________________Choose the right car based on your needs. Check out Yahoo! Autos new Car Finder tool. http://autos.yahoo.com/carfinder/ _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave