Re: [foxboro] Configure objects in FoxDraw

  • From: "Boulay, Russ" <Russ.Boulay@xxxxxxxxxxxxxxxxxxxxxx>
  • To: "foxboro@xxxxxxxxxxxxx" <foxboro@xxxxxxxxxxxxx>
  • Date: Thu, 19 Feb 2015 02:05:31 -0500

Finally had a chance to logi into a system.
In the latest versions of FoxView/Foxdraw......stuff formerly found in the 
foxdraw.ini file are now found in the registry...

Title of keys speak for themselves.....but Settings, then WindowPos



[cid:image001.png@01D04BCF.64DFB3C0]





-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On 
Behalf Of Jim Aster
Sent: Wednesday, February 18, 2015 2:02 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Configure objects in FoxDraw



Sorry, I meant to reply to this earlier.  I searched both the C: and D: drives 
for the foxdraw.ini file and could not find the file.  I also searched for this 
same file on the properly working machine next to it with the same results, 
file not found.



Thank you,



Jim Aster - Sr. Systems Engineer

mailto:JimA@xxxxxxxxxxx

Western States Controls





-----Original Message-----

From: foxboro-bounce@xxxxxxxxxxxxx<mailto:foxboro-bounce@xxxxxxxxxxxxx> 
[mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Boulay, Russ

Sent: Wednesday, February 18, 2015 1:38 PM

To: foxboro@xxxxxxxxxxxxx<mailto:foxboro@xxxxxxxxxxxxx>

Subject: Re: [foxboro] Configure objects in FoxDraw



The location would have also been found in the foxdraw.ini file



Sent from my iPhone



> On Feb 18, 2015, at 1:36 PM, Jim Aster 
> <jima@xxxxxxxxxxx<mailto:jima@xxxxxxxxxxx>> wrote:

>

> We have a winner!!!!!  Thank you Sean, this did the trick.  I followed your 
> instructions and the Configure Objects window appeared in the top left 
> corner.  I then changed the position to 500x200 and got it close to the 
> center of the screen where it was before.

>

> Many many many thanks,

>

> Jim Aster - Sr. Systems Engineer

> mailto:JimA@xxxxxxxxxxx

> Western States Controls

>

>

> -----Original Message-----

> From: foxboro-bounce@xxxxxxxxxxxxx<mailto:foxboro-bounce@xxxxxxxxxxxxx>

> [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Redmond, Sean S

> Sent: Wednesday, February 18, 2015 11:17 AM

> To: foxboro@xxxxxxxxxxxxx<mailto:foxboro@xxxxxxxxxxxxx>

> Subject: Re: [foxboro] Configure objects in FoxDraw

>

> Jim,

>

> pos_win "Configure Objects" -position 10x10

>

> try pos_win -help for more options

>

> Sean

> -----Original Message-----

> From: foxboro-bounce@xxxxxxxxxxxxx<mailto:foxboro-bounce@xxxxxxxxxxxxx>

> [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Jim Aster

> Sent: Thursday, 19 February 2015 8:10 a.m.

> To: foxboro@xxxxxxxxxxxxx<mailto:foxboro@xxxxxxxxxxxxx>

> Subject: Re: [foxboro] Configure objects in FoxDraw

>

> Sean,

>

> Thanks for the reply,  I ran pos_win and found that both Foxdraw and 
> Configure Objects were open.  I closed Foxdraw and re-ran pos_win.  As 
> expected Foxdraw and Configure Objects were absent from the list.  Finally I 
> opend Foxdraw and re-ran pos_win and only Foxdraw showed in the list.  So it 
> looks like Configure Objects is opening, but the million dollar question is 
> how do I get it to show in a viewable space on the screen?

>

> Many thanks,

>

> Jim Aster - Sr. Systems Engineer

> mailto:JimA@xxxxxxxxxxx

> Western States Controls

>

>

> -----Original Message-----

> From: foxboro-bounce@xxxxxxxxxxxxx<mailto:foxboro-bounce@xxxxxxxxxxxxx>

> [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Redmond, Sean S

> Sent: Wednesday, February 18, 2015 10:39 AM

> To: foxboro@xxxxxxxxxxxxx<mailto:foxboro@xxxxxxxxxxxxx>

> Subject: Re: [foxboro] Configure objects in FoxDraw

>

> Jim,

>

> Have you tried using configure objects from the menu or the short cut keys?  
> Quitting Foxdraw should close the config objects window.

> If you use /usr/fox/wp/bin/tools/pos_win you see heaps of stuff including 
> FoxDraw.  To me it looks like if configure objects is open the line Configure 
> Objects appears in output of pos_win.

> Set Selection Attributes appears for graphic attributes.

>

>

>

> Sean

>

> -----Original Message-----

> From: foxboro-bounce@xxxxxxxxxxxxx<mailto:foxboro-bounce@xxxxxxxxxxxxx>

> [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Jim Aster

> Sent: Thursday, 19 February 2015 7:19 a.m.

> To: foxboro@xxxxxxxxxxxxx<mailto:foxboro@xxxxxxxxxxxxx>

> Subject: Re: [foxboro] Configure objects in FoxDraw

>

> Tim,

>

> Thank you for your reply.  I am working with Rick and we just verified that 
> all of the monitors are setup correctly and appear in the setup exactly as 
> they are physically configured.  I am going to try disabling all of the other 
> monitors except the primary to see if this resolves the issue and report back 
> shortly.

>

> Thanks again,

>

> Jim Aster - Sr. Systems Engineer

> mailto:JimA@xxxxxxxxxxx

> Western States Controls

>

>

>

>

>

> ________________________________

>

>

>

> NOTICE - This message and any attached files may contain information that is 
> confidential, legally privileged or proprietary. It is intended only for use 
> by the intended recipient. If you are not the intended recipient or the 
> person responsible for delivering the message to the intended recipient,be 
> advised that you have received this message in error. Any dissemination, 
> copying, use or re-transmission of this message or attachment, or the 
> disclosure of any information therein, is strictly forbidden. BlueScope Steel 
> Limited does not represent or guarantee that this message or attachment is 
> free of errors, virus or interference.

>

> If you have received this message in error please notify the sender 
> immediately and delete the message. Any views expressed in this email are not 
> necessarily the views of BlueScope Steel Limited.

>

>

> ______________________________________________________________________

> _ This mailing list is neither sponsored nor endorsed by Invensys

> Process Systems (formerly The Foxboro Company). Use the info you

> obtain here at your own risks. Read

> http://www.thecassandraproject.org/disclaimer.html

>

> foxboro mailing list:             //www.freelists.org/list/foxboro

> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join

> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

>

>

>

>

>

> ______________________________________________________________________

> _ This mailing list is neither sponsored nor endorsed by Invensys

> Process Systems (formerly The Foxboro Company). Use the info you

> obtain here at your own risks. Read

> http://www.thecassandraproject.org/disclaimer.html

>

> foxboro mailing list:             //www.freelists.org/list/foxboro

> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join

> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

>

>

> ________________________________

>

>

>

> NOTICE - This message and any attached files may contain information that is 
> confidential, legally privileged or proprietary. It is intended only for use 
> by the intended recipient. If you are not the intended recipient or the 
> person responsible for delivering the message to the intended recipient,be 
> advised that you have received this message in error. Any dissemination, 
> copying, use or re-transmission of this message or attachment, or the 
> disclosure of any information therein, is strictly forbidden. BlueScope Steel 
> Limited does not represent or guarantee that this message or attachment is 
> free of errors, virus or interference.

>

> If you have received this message in error please notify the sender 
> immediately and delete the message. Any views expressed in this email are not 
> necessarily the views of BlueScope Steel Limited.

>

>

> ______________________________________________________________________

> _ This mailing list is neither sponsored nor endorsed by Invensys

> Process Systems (formerly The Foxboro Company). Use the info you

> obtain here at your own risks. Read

> http://www.thecassandraproject.org/disclaimer.html

>

> foxboro mailing list:             //www.freelists.org/list/foxboro

> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join

> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

>

>

>

>

>

> ______________________________________________________________________

> _ This mailing list is neither sponsored nor endorsed by Invensys

> Process Systems (formerly The Foxboro Company). Use the info you

> obtain here at your own risks. Read

> http://www.thecassandraproject.org/disclaimer.html

>

> foxboro mailing list:             //www.freelists.org/list/foxboro

> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join

> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

>

>

> ______________________________________________________________________

> This email has been scanned by the Symantec Email Security.cloud service.

> ______________________________________________________________________



*** Confidentiality Notice: This e-mail, including any associated or attached 
files, is intended solely for the individual or entity to which it is 
addressed. This e-mail is confidential and may well also be legally privileged. 
If you have received it in error, you are on notice of its status. Please 
notify the sender immediately by reply e-mail and then delete this message from 
your system. Please do not copy it or use it for any purposes, or disclose its 
contents to any other person. This email comes from a division of the Invensys 
Group, owned by Invensys Limited, which is a company registered in England and 
Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X 
7AW (Registered number 166023). For a list of European legal entities within 
the Invensys Group, please select the Legal Entities link at invensys.com. 
Invensys Limited is owned by the Schneider-Electric Group.



You may contact Invensys Limited on +44 (0)20 3155 1200 or e-mail 
reception@xxxxxxxxxxxx<mailto:reception@xxxxxxxxxxxx>. This e-mail and any 
attachments thereto may be subject to the terms of any agreements between 
Invensys (and/or its subsidiaries and affiliates) and the recipient (and/or its 
subsidiaries and affiliates).



_______________________________________________________________________

This mailing list is neither sponsored nor endorsed by Invensys Process Systems 
(formerly The Foxboro Company). Use the info you obtain here at your own risks. 
Read http://www.thecassandraproject.org/disclaimer.html

foxboro mailing list:             //www.freelists.org/list/foxboro

to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join

to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave







_______________________________________________________________________

This mailing list is neither sponsored nor endorsed by Invensys Process Systems 
(formerly The Foxboro Company). Use the info you obtain here at your own risks. 
Read http://www.thecassandraproject.org/disclaimer.html

foxboro mailing list:             //www.freelists.org/list/foxboro

to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join

to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave



______________________________________________________________________

This email has been scanned by the Symantec Email Security.cloud service.

______________________________________________________________________

________________________________
*** Confidentiality Notice: This e-mail, including any associated or attached 
files, is intended solely for the individual or entity to which it is 
addressed. This e-mail is confidential and may well also be legally privileged. 
If you have received it in error, you are on notice of its status. Please 
notify the sender immediately by reply e-mail and then delete this message from 
your system. Please do not copy it or use it for any purposes, or disclose its 
contents to any other person. This email comes from a division of the Invensys 
Group, owned by Invensys Limited, which is a company registered in England and 
Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X 
7AW (Registered number 166023). For a list of European legal entities within 
the Invensys Group, please select the Legal Entities link at invensys.com. 
Invensys Limited is owned by the Schneider-Electric Group.

You may contact Invensys Limited on +44 (0)20 3155 1200 or e-mail 
reception@xxxxxxxxxxxx. This e-mail and any attachments thereto may be subject 
to the terms of any agreements between Invensys (and/or its subsidiaries and 
affiliates) and the recipient (and/or its subsidiaries and affiliates).


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             //www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts:

  1. Home
  2. foxboro
  3. Archive
  4. 02-2015