Also look at the LIM block in conjunction with these CALC block suggestions.
Toggling the FOLLOW parameter provides another variation...
Joseph M. Riccardi
386-451-7607 Cell
Joe@xxxxxxxxxxxxx
"To give real service you must add something that cannot be bought or measured
with money; and that is sincerity and integrity." - Donald A. Adams
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Kinsinger, Matthew R
Sent: Monday, November 9, 2015 5:25 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Achieving deadband functionality in IACC
Use a calc block in between the signal and where you want to use it. If the
input is more than the output plus your deadband (or half your deadband
depending on how you define it) or less than the output minus your deadband,
make the input the output. Otherwise the output remains unchanged.
Sent from my Verizon 4G LTE Android Smartphone, Matt Kinsinger 330-472-1454
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
