Re: [foxboro] ACTTOC in GDEV blocks
- From: "Pirie, Sandra M" <Sandra.Pirie@xxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Wed, 19 Apr 2006 08:10:54 -0500
Thanks Dirk,
The GDEV block has a TOC and dev limits configured, but no DSR_RB (=3D =
0).
Regards,
Sandra.
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Pauwels, Dirk - RSM
Sent: 19 April 2006 12:54
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] ACTTOC in GDEV blocks
If you have a TOC and dev limits and DSR_RB =3D3D 1 then you should =
always
get the ACTTOC.
Rgds,
Dirk
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Pirie, Sandra M
Sent: woensdag 19 april 2006 13:28
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] ACTTOC in GDEV blocks
Hi List,
One example of a GDEV block for an ROV calculates the ACTTOC (actual
travel time) whilst another doesn't. Is it because the DSR_RB is not
connected?
How can I get the ACTTOC calculation to work?
Thanks,
Sandra.
=3D20
=3D20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=3D20
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: =3D
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djoin
to unsubscribe: =3D
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dleave
=3D20
=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe: =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
