Thanks a lot Kevein....This is exactly what I was looking for. I just tried it and it worked fine! Dale =20 -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Kevin Fitzgerrell Sent: Thursday, May 31, 2007 7:46 PM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] 51B at 6.5.2 and Flat Screens NEC 2010 Dual Head Hi Dale, See the Framebuffer FAQ for details: http://www.sunshack.org/data/fbfaq/FrameBuffer.html#2b Also some info on The Cassandra Project website: http://www.thecassandraproject.org/wiki/index.php/Display_Resolution_on_ the_B-style_box Regards, Kevin FitzGerrell On 6/1/07, Gillis, Dale <Dale.Gillis@xxxxxxxxxxxxx> wrote: > Hello List > > Need some help with setting the resolutions on a 51B Box using flat > screens. The problem is that the viewable area on the Flat Screen is a > little too big and you can't see the whole picture. (I have to resize it > with the monitor buttons and make the top bar disappear...TIME DATE > etc). I searched the archives and found some useful info. They say to > set the card resolution in the 4th tool kit mode with the setenv > command. This is what I used: > > setenv output-device screen:r1152x900x66 > > I rebooted the box and it worked great....except for it only worked on > the Primary Video Card.....Does anyone know how to set this to the > Secondary Video Card as well?????????? I did a boot -r and even tried > removing the second card and then adding it again but to no avail. > > > Dale Gillis > Instrument Technician > Stora Enso Port Hawkesbury Ltd. > PO Box 9500 > B9A 1A1 > Phone:902-625-2460 Ext 4401 or 6233 > Fax : 902-625-2098 > Pager:317 (Dial 8 to get into Paging System) > > > _______________________________________________________________________ > This mailing list is neither sponsored nor endorsed by Invensys Process > Systems (formerly The Foxboro Company). Use the info you obtain here at > your own risks. Read http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave > > =20 =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html =20 foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin to unsubscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
