[foxboro] Redundancy Problem.

From: "Rajamanickam ,Vijaykumar" <Vijaykumar.Rajamanickam@xxxxxxxxxxxx>
To: "foxboro@xxxxxxxxxxxxx" <foxboro@xxxxxxxxxxxxx>
Date: Tue, 10 Apr 2012 08:03:49 -0400
Dear All,
Here complete system has been taken online all FBM and workstations are 
communicating (Except DCS BMS Communication).
We are facing problem with FCP redundancy. The second FCP (22660E ) remains in 
fail (green and red leds on).
We tried by changing slot and reboot it is not working. While trying to read 
Letterbug it is showing error in for connection.
IR Led is not at all blinking for both read and write operation.
After hard reboot and Power reboot it is showing same problem.

Please suggest the solution.

MAC Add - 22660E
Hardware Part no- P0917YZ
Hardware Revision - 0T
Hardware Date - 1013
Image Revision - 850034

Also our Engineer tried the below steps which advised to him,
Following are the results of each steps-



1)      Have u installed only the problematic FCP alone in the Base plate and 
checked the same .I mean single FCP270 . Please try installing the single FCP 
on both the Baseplate slot one by one and see if its working . The FCP to be 
connected to the splitter connecter cable accordingly .

Problematic FCP Status in single configuration -Red LED Steady and Green LED 
Blinking.

IR is working ,unable to Read / Write Status.



2)      Does the Red and Green Light blink and then within few seconds turn 
steady or does it remain in RED/Green(Steady) the moment you turn the FCP on .

Startup time -- Red LED Blinking and Green LED Blinking.

After startup -- Red LED Steady and Green LED Blinking.



3)      Can you install only the single FCP and try to initialize the FCP .



IR is working ,unable to Read / Write Status.

Unable to initialize



4)      Can you use the letter bug and rename the FCP with NOSUCH and then 
rename the FCP back to the original FCP name .

Problematic FCP Letterbug rename not possible as IR is not working.
Second FCP checked with NOSUCH it is working fine.

is it possible to check in any other way please suggest.......

Regards,

R.Vijaykumar.



*** Confidentiality Notice: This e-mail, including any associated or attached 
files, is intended solely for the individual or entity to which it is 
addressed. This e-mail is confidential and may well also be legally privileged. 
If you have received it in error, you are on notice of its status. Please 
notify the sender immediately by reply e-mail and then delete this message from 
your system. Please do not copy it or use it for any purposes, or disclose its 
contents to any other person. This email comes from a division of the Invensys 
Group, owned by Invensys plc, which is a company registered in England and 
Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X 
7AW (Registered number 166023). For a list of European legal entities within 
the Invensys Group, please go to http://www.invensys.com/en/legal/default.aspx.

You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail 
reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject 
to the terms of any agreements between Invensys (and/or its subsidiaries and 
affiliates) and the recipient (and/or its subsidiaries and affiliates).


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             //www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
[foxboro] Redundancy Problem.

Other related posts:
