Hello all,
I got a task from a client to recover an old FOXBORO server with IA 7.1.1.
There was some problems with the HDD Raid array that got degradated since one
of the old HDD failed. I managed to copy the HDD content into a new HDD and
boot windows XP. In the beginning windows will just reboot as soon the FOX user
automatic logged in, even with a BSOD. After booting into safe mode and
disabling the I/A and reinstalling IA, I managed to get into XP without BSOD.
But now if i activate IA again the PC goes into a continuous boot cycle after a
while.
I have found this old conversation in the mailing list.
//www.freelists.org/post/foxboro/foxboro-IA-V80-software-installation-continuous-boot-cycle,2
But unfortunately i dont understand so much about FOX, i can just managed to
scratch the surface. I have all the original diskettes with commit and revision
level if needed.
Was hopping some expert could share some light, i will like very much to
recover this old installation since it has Fox AIM installed and licensed.
Best regards,Paulo Louro
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
