Re: [foxboro] I/A V8.0 software installation- continuous boot cycle
- From: Sivanath Sutty <srisiva@xxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Sat, 06 Aug 2005 07:07:51 -0600
Ali,
Restore the machine with initial CD provided by Dell.
Install or upgrade the optical card drivers
Change the machine name to TLAW01 and perform Day0. You should be ok with
that.
Regards
Siva
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Ali Ahmed Zahidi
Sent: Thursday, August 04, 2005 9:29 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] I/A V8.0 software installation- continuous boot cycle
Dear Boulay,
Let me clear the problem that when day0 installation completes and I select
to reboot the station, the station boots upand window XP shell comes up.
After Windows XP shell, exceed software starts and Foxboro initial logo
appears on the screen for few seconds and then disappears but before showing
the FoxView window the station automatically shuts down and restart and do
the same in the next boot up and in this way it goes to continuous boot
cycle.
Rgds,
Ali
----- Original Message -----
From: "Boulay, Russ" <russ.boulay@xxxxxxxxxxxxxxxx>
To: <foxboro@xxxxxxxxxxxxx>
Sent: Thursday, August 04, 2005 4:28 AM
Subject: Re: [foxboro] I/A V8.0 software installation- continuous boot cycle
> Some key questions would be:
>
> When does the blue screen occur?
> Instantly or after several minutes into the bootup.
>
> Did you install the committal diskette more than once?
> There is an install issue where disabling I/A to perform a second or
> day1 commit will produce a blue screen on next bootup if I/A is not
> manually
> told to restart after committal. The bootup looks for the intermediate
> network drivers, fails to find them and then blue screens. This would be
> several minutes into the bootup. You can solve the issue by booting into
> Safe mode, go into Control Panel, Select the Red Fox icon, disable and
> enable I/A, and then machine will boot.
>
> If you still have blue screen issues after this, you have a bad install.
> It is key that the initial install process is not cancelled in any way.
> The failure to get the intermediate ethernet drivers correctly installed
> will produce your results.
>
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
> On
> Behalf Of Ken Heywood
> Sent: Thursday, August 04, 2005 5:44 AM
> To: foxboro@xxxxxxxxxxxxx
> Subject: Re: [foxboro] I/A V8.0 software installation- continuous boot
> cycle
>
> Since this is a new system, a call to the CSC would help you the most.
> They'll have an expert look at your config and walk you through it.
>
> -----Original Message-----
> From: ALI AHMED ZAHIDI [mailto:alizahidi@xxxxxxxxxxx]
> Sent: Thu 8/4/2005 5:05 AM
> To: foxboro@xxxxxxxxxxxxx
> Cc:
> Subject: [foxboro] I/A V8.0 software installation- continuous boot
> cycle
>
>
>
> Dear All, We are setting up a version 8.0 I/A Series system at our
> site
> withone P92 station running with Windows XP, one non-FT FCP270 and
> few DIN
> FBMs. We are facing some problems during installation of I/A Series
> V8.0
> software. After a successful Day0 installation when the P92 station
> was
> rebooted it went into continuous boot cycle. After Day0 installation
> Trailer
> CD and FoxView/FoxDraw was installed. In the system definition GPS
> or time
> strobe hw is set to "No". I also checked /usr/fox/sp/tk.cfg file and
> found
> the contents to be o.k. i.e TLAW01 INT where TLAW01 is our AW
> letterbug
> I performed day0 installation after connecting the P92 to ethernet
> switches(the control network). Please note that at the time of
> installation
> and reboot of station FCP270 and DIN FBMs were not connected to the
> control
> network. The FCP270 and DIN FBM are defined in system definiton. For
> system
> definiton SysDef ver 2.5 was used. Kindly advise if anyone have any
> idea
> about the problem. Rgds, Ali Ahmed Zahidi
>
>
----------------------------------------------------------------------------
> Express yourself instantly with MSN Messenger! MSN Messenger[1]
> Download
> today it's FREE!
>
> --- Links ---
> 1 http://g.msn.com/8HMAEN/2743??PS=47575
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys
> Process
> Systems (formerly The Foxboro Company). Use the info you obtain here
> at
> your own risks. Read
> http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list:
> //www.freelists.org/list/foxboro
> to subscribe:
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
>
> -- No attachments (even text) are allowed --
> -- Type: application/ms-tnef
> -- File: winmail.dat
>
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: //www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: //www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
