Has anyone out there worked with Modbus communications between the FBM224 and the Atlas Copco Elektronikon Sequencer? I have a good communications line between the two and still no talking taking place. Anyone have any ideas? Like dip switch settings on the FBM224 TA? My next step may be to have the Atlas Copco folks come in and assure me they are trying to send information. Thanks Robert Balmer Climax Molybdenum Co. Applications Analyst/Programmer ISA CCST Fort Madison Iowa 319 463 2206 rbalmer@xxxxxxxxxxxxxxx This message (including attachments) is for the designated recipient only and may contain privileged, proprietary, or otherwise confidential information. If you are not the intended recipient or have received this message in error, please notify the sender immediately and delete the original. Any other use of this e-mail is prohibited. Este mensaje (incluyendo los archivos adjuntos) está dirigido sólo al receptor señalado y puede contener información de carácter privilegiada, privada o confidencial. Si usted no es el receptor señalado o bien ha recibido este mensaje por error, por favor notifique inmediatamente al remitente y elimine el mensaje original. Cualquier otro uso de este mensaje de correo electrónico está prohibido. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave