Robert, The best thing you can do is to go to www.win-tech.com and download a copy of ModScan32 software. They have a master and a slave version of the software. Amongst other things, ModScan lets you look at the raw data from the slave or master device and that's really useful when the device supports "Modbus" (but you have to read all three registers of a data point or it sends an exception response and it also has a special way of indicating a negative number). I usually start by getting comms going to the slave, that way I have a known good cable, Baud rate, stop bits, etc... _and_ I know what registers are supported and how they are addressed - invaluable. Once you know this stuff then the Foxboro end is usually straight forward. Be careful of some gear that is set up so that its comms could time out, they usually stop responding unless you write the special string of numbers to some very specific addresses. Rgds Steve B. ----- Original Message ----- From: "Balmer, Robert D." <rbalmer@xxxxxxxxxxxxxxx> To: "Foxboro DCS Mail List" <foxboro@xxxxxxxxxxxxx> Sent: Wednesday, January 19, 2005 10:27 AM Subject: [foxboro] FBM224 and Atlas Copco Elektronikon > Has anyone out there worked with Modbus communications between the FBM224 > and the Atlas Copco Elektronikon Sequencer? > I have a good communications line between the two and still no talking > taking place. > > Anyone have any ideas? Like dip switch settings on the FBM224 TA? > > My next step may be to have the Atlas Copco folks come in and assure me they > are trying to send information. > > Thanks > > > > Robert Balmer > > Climax Molybdenum Co. > > > > Applications Analyst/Programmer > > ISA CCST > > Fort Madison Iowa > > 319 463 2206 > > rbalmer@xxxxxxxxxxxxxxx > > > > This message (including attachments) is for the designated recipient only and may contain privileged, proprietary, or otherwise confidential information. If you are not the intended recipient or have received this message in error, please notify the sender immediately and delete the original. Any other use of this e-mail is prohibited. > > Este mensaje (incluyendo los archivos adjuntos) está dirigido sólo al receptor señalado y puede contener información de carácter privilegiada, privada o confidencial. Si usted no es el receptor señalado o bien ha recibido este mensaje por error, por favor notifique inmediatamente al remitente y elimine el mensaje original. Cualquier otro uso de este mensaje de correo electrónico está prohibido. > > > > > _______________________________________________________________________ > This mailing list is neither sponsored nor endorsed by Invensys Process > Systems (formerly The Foxboro Company). Use the info you obtain here at > your own risks. Read http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave > > _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave