[foxboro] Autoscaling trends in Foxview 9.0.1
- From: "Loudermilk, Virgil:" <Virgil.Loudermilk@xxxxxxxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Fri, 25 May 2007 14:52:11 -0400
List,
Has anyone been successful in either understanding or improving how the
autoscaling works in trends? All too often, we get something like this
example - a reading of 1.5, and high and low limits of +497 and -497.
The trends are almost always too flat to have any value. Sometimes I
will see one data point that causes it, but usually it is a perfect
straight line. I'm used to autoscaling putting the high and low points
at something like 80-90% and 10-20% of the scale. Am I missing some
setting for this?
Thanks,
Virgil Loudermilk
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
- » [foxboro] Autoscaling trends in Foxview 9.0.1
