[ExchangeList] Re: Syntax for ISINTEG.

  • From: "Amit Kapoor" <amit@xxxxxxxxxxxxx>
  • To: <exchangelist@xxxxxxxxxxxxx>
  • Date: Tue, 4 Apr 2006 14:37:00 +0530



I need to run ISINTEG on private database i.e priv1.edb. 

Because when I perform backup using NTBackup it gives me error and just
copies 20 MB of data to the backup file.

There are no such errors on the public database store.


Following is the error message that I am getting on private database store.


Information Store (3028) First Storage Group: The database page read from
the file "D:\exchsrvr\mdbdata\priv1.edb" at offset 20656128
(0x00000000013b3000) for 4096 (0x00001000) bytes failed verification due to
a page number mismatch.  The expected page number was 5042 (0x000013b2) and
the actual page number was 1929384882 (0x730013b2).  The read operation will
fail with error -1018 (0xfffffc06).  If this condition persists then please
restore the database from a previous backup. This problem is likely due to
faulty hardware. Please contact your hardware vendor for further assistance
diagnosing the problem.


Please Help.



From: exchangelist-bounce@xxxxxxxxxxxxx
[mailto:exchangelist-bounce@xxxxxxxxxxxxx] On Behalf Of
Sent: Monday, April 03, 2006 7:45 PM
To: exchangelist@xxxxxxxxxxxxx
Subject: [ExchangeList] Re: Syntax for ISINTEG.


Are you having some issues with your public database store that you're
wishing to perform isinteg?


1. Make a backup of your public database store using your backup software.
To be extra safe, I would also copy that database file off to another

2. To run isinteg, dismount your public folder store in ESM. Open command
prompt, go to where exchange was installed, your program files\exchsrvr\bin
directory. Type isinteg -s servername -fix -test alltests. At the end of an
Isinteg fix run, you will likely see hundreds to thousands of warnings.  The
thing you need to worry about is not warnings, but errors. You need to run
isinteg until there are zero errors reported. 

3. It's always recommended to run defrag after you perform isinteg. Go to
your command prompt again, into your exchsrvr\bin directory. Type eseutil /d
"E:\EXCHSRVR\priv1.edb" (Your path of your db) 



From: exchangelist-bounce@xxxxxxxxxxxxx
[mailto:exchangelist-bounce@xxxxxxxxxxxxx] On Behalf Of Amit Kapoor
Sent: Monday, April 03, 2006 8:15 AM
To: exchangelist@xxxxxxxxxxxxx
Subject: [ExchangeList] Syntax for ISINTEG.
Importance: High

Hi All,


I want to run ISINTEG on priv1.edb database. Will it have any impact on the
Public Database store.

I was suggested this by few List members, but I have problem in taking
backup of Exchange 2003 server.


Do I take offline backup of the database, if in case anything went wrong,
then I can restore the database from offline backup. (offline Backup means
folder backup)


My question is : 

1)       Will Offline Backup be useful.

2)       Syntax for executing ISINTEG on private edb database.

3)       Do I need to run eseutil after running ISINTEG tool.








Other related posts: