i think it is a good idea i just see 2 problems with it 1 we would need to cut Another 1x2 inch aluminum bar with a Jigsaw!! 2 I don't know that the lexan could hep much seeing that we only have maybe 5 inches or so to work with in order to stay in the starting size and i think much more would be needed to prevent tangleing btw ignore nick he doesn't know what he is talking about --- Michael Montazeri <chaoticprout@xxxxxxxxx> wrote: > tangles? how? > > On Apr 7, 2005 7:12 AM, Karen Hillblom > <KandNplace@xxxxxxxxxxxxxxxx> wrote: > > once again it is a good idea but we have to think > if it is worthe the risk > > of getting tangeled > > if that happens it can screw up the arm and we > don't have much AL to replace > > it with. > > ----- Original Message ----- > > From: "Michael Montazeri" <chaoticprout@xxxxxxxxx> > > To: <eagleengineering@xxxxxxxxxxxxx> > > Sent: Wednesday, April 06, 2005 10:56 PM > > Subject: [eagleengineering] Idea for arm! Feedback > please. > > > > > Everyone please take a look at attached image. > > > My thoughts for an effective double loading arm > that would work great. > > > Rather than 1 grabber, divide it into 2 and have > a lexan panel across > > > so that tetras wont get mixed up like at So Cal. > Thanks > > > > > > > > > Michael > > > > > > > > > __________________________________ Yahoo! Messenger Show us what our next emoticon should look like. Join the fun. http://www.advision.webevents.yahoo.com/emoticontest