[eagleengineering] Re: Idea for arm! Feedback please.
- From: "Karen Hillblom" <KandNplace@xxxxxxxxxxxxxxxx>
- To: <eagleengineering@xxxxxxxxxxxxx>
- Date: Thu, 7 Apr 2005 21:48:52 -0700
also the longer it is the more torq
more torq = bad :(
----- Original Message -----
From: Jordan Locano
To: eagleengineering@xxxxxxxxxxxxx
Sent: Thursday, April 07, 2005 9:45 PM
Subject: [eagleengineering] Re: Idea for arm! Feedback please.
Mike, you would have to create a t joint, and not even a solid one at
that...the gripper we have is lodged in between a solid piece of tubing which
is also reinforced! it just wond work, trust me...what about the 36 in space
between the 2 grippers? what about the stress of having 1T joint and 2 L
joints? it would be insanely...not good?...my idea adds very litle weight and
is functional...and yours isnt.
Michael Montazeri <chaoticprout@xxxxxxxxx> wrote:
The stress wouldn't be a problem since we help 3 tetras at once....
On Apr 7, 2005 9:36 PM, Jordan Locano wrote:
> ok fine, the position it would create would have the 2 tetras
overlap...now
> you say we have the plexi, thats great but it puts the tetras at an angle
> unless you have the 2 ends 36 in apart, do the math...plus, can you
imagine
> the stress of TWO tetras on one pivot point on the end, even if we weld
and
> support it it still is a huge amount of weight on 1x1 aluminum tubing.
>
> ________________________________
> Do you Yahoo!?
> Better first dates. More second dates. Yahoo! Personals
>
>
------------------------------------------------------------------------------
Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!
Other related posts:
