[duxuser] Re: embosser settings for notebook paper
- From: "Jean Menzies" <jemenzies@xxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Sat, 13 Sep 2008 12:17:19 -0600
Ah, said much better.
Jean
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On
Behalf Of George Bell
Sent: Saturday, September 13, 2008 12:11 PM
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: embosser settings for notebook paper
Hi Greg,
Depending on what version of DBT you are using, you should
be able to select a Form size of Narrow Width, 11 inch,
braille paper in DBT's embosser setup for the Juliet Pro 50.
This should give you the optimum settings which you can
adjust to allow for binding margins if required.
George.
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Greg
Daniel
Sent: 13 September 2008 18:42
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] embosser settings for notebook paper
Hi list,
I have a Juliet Pro 60 and need to Braille music on paper
which, after the
perfs are off, is the three-hole, 8.5 by 11 paper. Although
I have looked
through the settings in the Juliet menus, I haven't found
anything that
looks like the 31 or so spaces I'm accustomed to getting on
the Perkins
Brailler, having allowed for the three-hole margin. Is
there a rule of
thumb to use when addressing paper size questions? Thanks.
Greg
Columbus, Ohio
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may
also
* subscribe, unsubscribe, and set vacation mode and other
subscription
* options by visiting //www.freelists.org. The list
archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
Other related posts:
