Hi Greg, Depending on what version of DBT you are using, you should be able to select a Form size of Narrow Width, 11 inch, braille paper in DBT's embosser setup for the Juliet Pro 50. This should give you the optimum settings which you can adjust to allow for binding margins if required. George. -----Original Message----- From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Greg Daniel Sent: 13 September 2008 18:42 To: duxuser@xxxxxxxxxxxxx Subject: [duxuser] embosser settings for notebook paper Hi list, I have a Juliet Pro 60 and need to Braille music on paper which, after the perfs are off, is the three-hole, 8.5 by 11 paper. Although I have looked through the settings in the Juliet menus, I haven't found anything that looks like the 31 or so spaces I'm accustomed to getting on the Perkins Brailler, having allowed for the three-hole margin. Is there a rule of thumb to use when addressing paper size questions? Thanks. Greg Columbus, Ohio * * * * This message is via list duxuser at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * * * * * * This message is via list duxuser at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * *