[duxuser] Re: Cut off lines
- From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Thu, 15 Jan 2009 23:57:29 -0000
Hi Don,
I would have thought "ON", rather than the tail wagging to dog, so to
speak.
George.
________________________________
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of D Hansen
Sent: 15 January 2009 18:20
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: Cut off lines
Hi George:
I will check the embosser. They should be off, right?
Don
----- Original Message -----
From: George Bell <mailto:george@xxxxxxxxxxxxxxxxxxx>
To: duxuser@xxxxxxxxxxxxx
Sent: Thursday, January 15, 2009 3:28 AM
Subject: [duxuser] Re: Cut off lines
Hi Don,
Do you have Escape Codes turned on in Global: Embosser Setup?
George.
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of D Hansen
Sent: 15 January 2009 07:23
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Cut off lines
Hello:
Recently we've had a problem with cut off lines. We're using 10.5
with an XP computer and a Juliet Classic embosser. I have checked the
embosser settings several times and they are correct. The problem is
that two characters at the beginning of each line on the back side of
the paper are missing even though there is enough margin. Any help
would be greatly appreciated.
Don Hansen
Other related posts:
