Hi George: I will check the embosser. They should be off, right? Don ----- Original Message ----- From: George Bell To: duxuser@xxxxxxxxxxxxx Sent: Thursday, January 15, 2009 3:28 AM Subject: [duxuser] Re: Cut off lines Hi Don, Do you have Escape Codes turned on in Global: Embosser Setup? George. From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of D Hansen Sent: 15 January 2009 07:23 To: duxuser@xxxxxxxxxxxxx Subject: [duxuser] Cut off lines Hello: Recently we've had a problem with cut off lines. We're using 10.5 with an XP computer and a Juliet Classic embosser. I have checked the embosser settings several times and they are correct. The problem is that two characters at the beginning of each line on the back side of the paper are missing even though there is enough margin. Any help would be greatly appreciated. Don Hansen