I believe you would use the PRF choice in save as. ----- Original Message ----- From: Christine Simpson To: duxuser@xxxxxxxxxxxxx Sent: Wednesday, September 10, 2008 9:32 PM Subject: [duxuser] Back translation Hi, I hope someone can please help me. I am using DBT10.6 and Microsoft Word. I have a large BRF file. I need a portion of it in print as a microsoft word file. I have opened DBT, Have opened my BRF file which has opened into a DXB file. Next I have cut and pasted the required paragraphs out of that file and into a new DXB file. I then translated the new DXB file using CTRL-T and got a properly formatted DXP file. I now need to save this in such a way that it can be read by Microsoft Word. I have looked at the Save As options but am not sure what (if any) of these I should be using. I have also tried to cut and paste the DXP file into a blank word file but the result requires considerable cleaning up and is not appropriate unless there is no other way. any help will be appreciated- I'm certain there must be a more satisfactory way of doing this but I cannot work it out. Regards and thanks Christine . Christine Simpson Information Alternatives 22 Beaton Street Euroa VIC 3666 Tel: 61 3 5795 2307 Fax: 61 3 5795 2969 Email: cms.infoalt@xxxxxxxxxxx