[duxuser] Re: A question about embosser settings
- From: "Nicky Roos" <nicky.roos@xxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Sun, 14 Sep 2008 19:29:49 +0200
Hi George
This is just a PC at home, and not linked to any network.
Any further thoughts?
Kind Regards
Nicky
----- Original Message -----
From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
To: <duxuser@xxxxxxxxxxxxx>
Sent: Sunday, September 14, 2008 12:47 PM
Subject: [duxuser] Re: A question about embosser settings
Hi Nicky,
Is you PC part of a network?
Is the embosser setup just for you, or for all users?
If your system is not retaining the Global Embosser changes
you make, it's just possible that this is due to a security
setting in your system which prevents Registry changes.
If that's the case, you may need to have a word with the
system Administrator to allow changes to be made in the
Duxbury branch of the Registry.
I've seen quite a few cases of late where administrators
have locked down the Registry tighter than Fort Knox.
George.
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Nicky
Roos
Sent: 14 September 2008 06:31
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] A question about embosser settings
I hope that someone will be able to help me. I have tried
to set my top and binding margins in my global settings, but
it does not want to accept it for all documents. If I
translate a word document, I still need to change my margin
settings under "document" in the menus. What am I doing
wrong? At this stage I am still using Duxbury 10.6.
Thanks in advance
Kind regards
Nicky
----- Original Message -----
From: "Jean Menzies" <jemenzies@xxxxxxx>
To: <duxuser@xxxxxxxxxxxxx>
Sent: Saturday, September 13, 2008 8:17 PM
Subject: [duxuser] Re: embosser settings for notebook paper
Ah, said much better.
Jean
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On
Behalf Of George Bell
Sent: Saturday, September 13, 2008 12:11 PM
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: embosser settings for notebook paper
Hi Greg,
Depending on what version of DBT you are using, you should
be able to select a Form size of Narrow Width, 11 inch,
braille paper in DBT's embosser setup for the Juliet Pro 50.
This should give you the optimum settings which you can
adjust to allow for binding margins if required.
George.
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Greg
Daniel
Sent: 13 September 2008 18:42
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] embosser settings for notebook paper
Hi list,
I have a Juliet Pro 60 and need to Braille music on paper
which, after the
perfs are off, is the three-hole, 8.5 by 11 paper. Although
I have looked
through the settings in the Juliet menus, I haven't found
anything that
looks like the 31 or so spaces I'm accustomed to getting on
the Perkins
Brailler, having allowed for the three-hole margin. Is
there a rule of
thumb to use when addressing paper size questions? Thanks.
Greg
Columbus, Ohio
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may
also
* subscribe, unsubscribe, and set vacation mode and other
subscription
* options by visiting //www.freelists.org. The list
archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may
also
* subscribe, unsubscribe, and set vacation mode and other
subscription
* options by visiting //www.freelists.org. The list
archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may
also
* subscribe, unsubscribe, and set vacation mode and other
subscription
* options by visiting //www.freelists.org. The list
archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
--
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 270.6.21/1669 - Release
Date: 2008/09/12
02:18 PM
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may
also
* subscribe, unsubscribe, and set vacation mode and other
subscription
* options by visiting //www.freelists.org. The list
archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
--
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 270.6.21/1670 - Release Date: 2008/09/13
12:50 PM
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
Other related posts:
