Hi Tesfaye, When using paper in the Braillo 200 do you get the same problem? Are all bad characters embossing the 4,5,6 dots in the 1,2,3 position? Best Regards, Mark ----- Original Message ----- From: "Tesfaye Mihretu" <Tesfaye.Mihretu@xxxxxxx> To: <duxhelp@xxxxxxxxxxxxx> Sent: Wednesday, June 16, 2004 9:30 AM Subject: [duxhelp] Re: Print Braille Embossing Problems > Hi mark, Setup we use is Windows devices. Configuration was done by system people so I am not able to give you more information than that. > > Thanks > Tesfaye > > -----Original Message----- > From: Mark Mercer [mailto:markm@xxxxxxxxxxxx] > Sent: Wednesday, June 16, 2004 9:17 AM > To: duxhelp@xxxxxxxxxxxxx > Subject: [duxhelp] Re: Print Braille Embossing Problems > > > Hi All, > > Looks like the Braillo is dropping bits. What port is being used? What > handshaking is being used if serial? The example given "did" and "bab" > shows that dots 123 are being dropped. Are all bad characters embossing the > 4,5,6 dots in the 1,2,3 position? > > Does DBT have a selection for hardware or software handshaking? Is DBT > fixed for hardware handshaking or does it use Windows port settings? I > didn't see anything in "emb.elt" for handshaking support. > > Best Regards, > Mark > > ----- Original Message ----- > From: "Tesfaye Mihretu" <Tesfaye.Mihretu@xxxxxxx> > To: <duxhelp@xxxxxxxxxxxxx>; <mark.gaunt@xxxxxxxxx>; "Anita Munshi" > <Anita.Munshi@xxxxxxx>; "Debbie Gillespie" <Debbie.Gillespie@xxxxxxx> > Cc: "Peter Sullivan" <peter@xxxxxxxxxx> > Sent: Wednesday, June 16, 2004 8:37 AM > Subject: [duxhelp] Print Braille Embossing Problems > > > > Hello David and All, I thought everything was fine with Beta 3 until We > run into Print Braille production. Here at the CNIB, we produce a > substantial number of print Braille children books every year. This is > Braille that is Embossed on a clear plastic sheets and collated with print. > > > > The problem with beta 3 is, embossed Braille on clear plastic is missing > all kind of dots all over the pages. For example, the word "did" changes to > "bab". Everytime we are using clear plastic sheets for embossing we get > error message that reads "printing error on Briallo 200 would you like to > cancel or retry" I could be wrong but I have a feeling this has to do with > the plastic we use. Mind you, we have been using the same raw material for > years for same purpose. > > > > > > I used Braillo 200 and BRF/DXB files that was created in DBT 10.4. Any > ideas why this is happening and any solutions. Also is it ok for us to use > Beta 3 or 4 for production or should we stick to testing only. > > > > Thanks > > Tesfaye > > CNIB Library > > * * * > > * This message is via list duxhelp at freelists.org. > > * To unsubscribe, send a blank message with > > * unsubscribe > > * as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also > > * subscribe, unsubscribe, and set vacation mode and other subscription > > * options by visiting //www.freelists.org. The list archive > > * is also located there. > > * Duxbury Systems' web site is http://www.duxburysystems.com > > * * * > > * * * > * This message is via list duxhelp at freelists.org. > * To unsubscribe, send a blank message with > * unsubscribe > * as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also > * subscribe, unsubscribe, and set vacation mode and other subscription > * options by visiting //www.freelists.org. The list archive > * is also located there. > * Duxbury Systems' web site is http://www.duxburysystems.com > * * * > * * * > * This message is via list duxhelp at freelists.org. > * To unsubscribe, send a blank message with > * unsubscribe > * as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also > * subscribe, unsubscribe, and set vacation mode and other subscription > * options by visiting //www.freelists.org. The list archive > * is also located there. > * Duxbury Systems' web site is http://www.duxburysystems.com > * * * * * * * This message is via list duxhelp at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * *