[duxhelp] Re: Print Braille Embossing Problems

  • From: "Tesfaye Mihretu" <Tesfaye.Mihretu@xxxxxxx>
  • To: <duxhelp@xxxxxxxxxxxxx>
  • Date: Wed, 16 Jun 2004 09:30:24 -0400

Hi mark,  Setup we use is Windows devices.  Configuration was done by system 
people so I am not able to give you more information than that.

Thanks
Tesfaye

-----Original Message-----
From: Mark Mercer [mailto:markm@xxxxxxxxxxxx]
Sent: Wednesday, June 16, 2004 9:17 AM
To: duxhelp@xxxxxxxxxxxxx
Subject: [duxhelp] Re: Print Braille Embossing Problems


Hi All,

Looks like the Braillo is dropping bits.  What port is being used?  What
handshaking is being used if serial?  The example given "did" and "bab"
shows that dots 123 are being dropped.  Are all bad characters embossing the
4,5,6 dots in the 1,2,3 position?

Does DBT have a selection for hardware or software handshaking?  Is DBT
fixed for hardware handshaking or does it use Windows port settings?  I
didn't see anything in "emb.elt" for handshaking support.

Best Regards,
Mark

----- Original Message ----- 
From: "Tesfaye Mihretu" <Tesfaye.Mihretu@xxxxxxx>
To: <duxhelp@xxxxxxxxxxxxx>; <mark.gaunt@xxxxxxxxx>; "Anita Munshi"
<Anita.Munshi@xxxxxxx>; "Debbie Gillespie" <Debbie.Gillespie@xxxxxxx>
Cc: "Peter Sullivan" <peter@xxxxxxxxxx>
Sent: Wednesday, June 16, 2004 8:37 AM
Subject: [duxhelp] Print Braille Embossing Problems


> Hello David and All,  I thought everything was fine with Beta 3 until We
run into Print Braille production.  Here at the CNIB, we produce a
substantial number of print Braille children books every year.  This is
Braille that is Embossed on a clear plastic sheets and collated with print.
>
> The problem with beta 3 is, embossed Braille on clear plastic is missing
all kind of dots all over the pages.  For example, the word "did" changes to
"bab".  Everytime we are using clear plastic sheets for embossing we get
error message that reads "printing error on Briallo 200 would you like to
cancel or retry"  I could be wrong but I have a feeling this has to do with
the plastic we use.  Mind you, we have been using the same raw material for
years for same purpose.
>
>
> I used Braillo 200  and BRF/DXB files that was created in DBT 10.4.  Any
ideas why this is happening and any solutions.  Also is it ok for us to use
Beta 3 or 4 for production or should we stick to testing only.
>
> Thanks
> Tesfaye
> CNIB Library
> * * *
> * This message is via list duxhelp at freelists.org.
> * To unsubscribe, send a blank message with
> *   unsubscribe
> * as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
> * subscribe, unsubscribe, and set vacation mode and other subscription
> * options by visiting http://www.freelists.org.  The list archive
> * is also located there.
> * Duxbury Systems' web site is http://www.duxburysystems.com
> * * *

* * *
* This message is via list duxhelp at freelists.org.
* To unsubscribe, send a blank message with
*   unsubscribe
* as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting http://www.freelists.org.  The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxhelp at freelists.org.
* To unsubscribe, send a blank message with
*   unsubscribe
* as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting http://www.freelists.org.  The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *

Other related posts: