[duxhelp] Re: Print Braille Embossing Problems

  • From: "Mark Mercer" <markm@xxxxxxxxxxxx>
  • To: <duxhelp@xxxxxxxxxxxxx>
  • Date: Wed, 16 Jun 2004 09:47:30 -0400

Hi Tesfaye,

If possible ask your system people what port is configured using the Windows
Device and the settings of the port.

Best Regards,
Mark

----- Original Message ----- 
From: "Tesfaye Mihretu" <Tesfaye.Mihretu@xxxxxxx>
To: <duxhelp@xxxxxxxxxxxxx>
Sent: Wednesday, June 16, 2004 9:39 AM
Subject: [duxhelp] Re: Print Braille Embossing Problems


> Hi Mark,  I am going to run the same files on a regular paper and get it
proof read by someone here and get back to you.
>
> Thanks
> Tesfaye
>
> -----Original Message-----
> From: Mark Mercer [mailto:markm@xxxxxxxxxxxx]
> Sent: Wednesday, June 16, 2004 9:36 AM
> To: duxhelp@xxxxxxxxxxxxx
> Subject: [duxhelp] Re: Print Braille Embossing Problems
>
>
> Hi Tesfaye,
>
> When using paper in the Braillo 200 do you get the same problem?
>
> Are all bad characters embossing the 4,5,6 dots in the 1,2,3 position?
>
> Best Regards,
> Mark
>
> ----- Original Message ----- 
> From: "Tesfaye Mihretu" <Tesfaye.Mihretu@xxxxxxx>
> To: <duxhelp@xxxxxxxxxxxxx>
> Sent: Wednesday, June 16, 2004 9:30 AM
> Subject: [duxhelp] Re: Print Braille Embossing Problems
>
>
> > Hi mark,  Setup we use is Windows devices.  Configuration was done by
> system people so I am not able to give you more information than that.
> >
> > Thanks
> > Tesfaye
> >
> > -----Original Message-----
> > From: Mark Mercer [mailto:markm@xxxxxxxxxxxx]
> > Sent: Wednesday, June 16, 2004 9:17 AM
> > To: duxhelp@xxxxxxxxxxxxx
> > Subject: [duxhelp] Re: Print Braille Embossing Problems
> >
> >
> > Hi All,
> >
> > Looks like the Braillo is dropping bits.  What port is being used?  What
> > handshaking is being used if serial?  The example given "did" and "bab"
> > shows that dots 123 are being dropped.  Are all bad characters embossing
> the
> > 4,5,6 dots in the 1,2,3 position?
> >
> > Does DBT have a selection for hardware or software handshaking?  Is DBT
> > fixed for hardware handshaking or does it use Windows port settings?  I
> > didn't see anything in "emb.elt" for handshaking support.
> >
> > Best Regards,
> > Mark
> >
> > ----- Original Message ----- 
> > From: "Tesfaye Mihretu" <Tesfaye.Mihretu@xxxxxxx>
> > To: <duxhelp@xxxxxxxxxxxxx>; <mark.gaunt@xxxxxxxxx>; "Anita Munshi"
> > <Anita.Munshi@xxxxxxx>; "Debbie Gillespie" <Debbie.Gillespie@xxxxxxx>
> > Cc: "Peter Sullivan" <peter@xxxxxxxxxx>
> > Sent: Wednesday, June 16, 2004 8:37 AM
> > Subject: [duxhelp] Print Braille Embossing Problems
> >
> >
> > > Hello David and All,  I thought everything was fine with Beta 3 until
We
> > run into Print Braille production.  Here at the CNIB, we produce a
> > substantial number of print Braille children books every year.  This is
> > Braille that is Embossed on a clear plastic sheets and collated with
> print.
> > >
> > > The problem with beta 3 is, embossed Braille on clear plastic is
missing
> > all kind of dots all over the pages.  For example, the word "did"
changes
> to
> > "bab".  Everytime we are using clear plastic sheets for embossing we get
> > error message that reads "printing error on Briallo 200 would you like
to
> > cancel or retry"  I could be wrong but I have a feeling this has to do
> with
> > the plastic we use.  Mind you, we have been using the same raw material
> for
> > years for same purpose.
> > >
> > >
> > > I used Braillo 200  and BRF/DXB files that was created in DBT 10.4.
Any
> > ideas why this is happening and any solutions.  Also is it ok for us to
> use
> > Beta 3 or 4 for production or should we stick to testing only.
> > >
> > > Thanks
> > > Tesfaye
> > > CNIB Library
> > > * * *
> > > * This message is via list duxhelp at freelists.org.
> > > * To unsubscribe, send a blank message with
> > > *   unsubscribe
> > > * as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
> > > * subscribe, unsubscribe, and set vacation mode and other subscription
> > > * options by visiting http://www.freelists.org.  The list archive
> > > * is also located there.
> > > * Duxbury Systems' web site is http://www.duxburysystems.com
> > > * * *
> >
> > * * *
> > * This message is via list duxhelp at freelists.org.
> > * To unsubscribe, send a blank message with
> > *   unsubscribe
> > * as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
> > * subscribe, unsubscribe, and set vacation mode and other subscription
> > * options by visiting http://www.freelists.org.  The list archive
> > * is also located there.
> > * Duxbury Systems' web site is http://www.duxburysystems.com
> > * * *
> > * * *
> > * This message is via list duxhelp at freelists.org.
> > * To unsubscribe, send a blank message with
> > *   unsubscribe
> > * as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
> > * subscribe, unsubscribe, and set vacation mode and other subscription
> > * options by visiting http://www.freelists.org.  The list archive
> > * is also located there.
> > * Duxbury Systems' web site is http://www.duxburysystems.com
> > * * *
>
> * * *
> * This message is via list duxhelp at freelists.org.
> * To unsubscribe, send a blank message with
> *   unsubscribe
> * as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
> * subscribe, unsubscribe, and set vacation mode and other subscription
> * options by visiting http://www.freelists.org.  The list archive
> * is also located there.
> * Duxbury Systems' web site is http://www.duxburysystems.com
> * * *
> * * *
> * This message is via list duxhelp at freelists.org.
> * To unsubscribe, send a blank message with
> *   unsubscribe
> * as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
> * subscribe, unsubscribe, and set vacation mode and other subscription
> * options by visiting http://www.freelists.org.  The list archive
> * is also located there.
> * Duxbury Systems' web site is http://www.duxburysystems.com
> * * *

* * *
* This message is via list duxhelp at freelists.org.
* To unsubscribe, send a blank message with
*   unsubscribe
* as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting http://www.freelists.org.  The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *

Other related posts: