[ddots-l] Re: Automation with sonar 5 not working right.

You probably need to minimise the others that you aren't using to there first state. You can only display so many widgets in the inspector view at any time.

Regards, Phil Muir
P J Muir Productions
Music and audio production
URL: www.philmuir.com/


----- Original Message ----- From: "Damon Fibraio" <dfibraio@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Sunday, July 23, 2006 3:50 AM
Subject: [ddots-l] Re: Automation with sonar 5 not working right.


That worked, although I thought I had checked it. Now, second question, not
related to the first. Any reason why when in the inspector tab in the
effects view, even in the effects third state none of the effects parameters
show up. Using the sonitis delay effect. This worked once before, but I am
noticing now that no matter what state the inspector is in, it is not
showing EQ, sends, or effects settings.

-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Rod
Sent: Saturday, July 22, 2006 10:13 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Automation with sonar 5 not working right.

Damen, you have one or more of your tracts armed. If any of the tracts are
armed, even the automation is armed, it will not go into automation. First,
unarmed all your tracts, then armed the parameter you wish to automate, and
proceed from there.

Rod
----- Original Message -----
From: "Damon Fibraio" <dfibraio@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>; <midimag@xxxxxxxxxxx>
Sent: Saturday, July 22, 2006 9:43 PM
Subject: [ddots-l] Automation with sonar 5 not working right.


Working on a project, all audio tracks. I arm something for
automation,
and 
using CT5,m press control R to start automation record mode and it
says it can't go into automation record mode, maybe I don't have
anything armed
for 
automation, but the volume control is armed. The automation record
option
is 
grayed out in the transport menu, too. What gives here?

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: