[ddots-l] Re: Audiophile USB having problems with midi Out

Hello:
Make sure that your internal sound card is the prefered playback device. You never want to have jaws speaking through the audiophile. 
Gord
----- Original Message ----- From: "Kenneth Spector" <ken_spector@xxxxxxxxxxx> 
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Wednesday, December 27, 2006 4:09 PM
Subject: [ddots-l] Re: Audiophile USB having problems with midi Out
Thank you for the suggestions. I went online and downloaded the new drivers for the device. I then followed the instructions from the FAQ regarding running two soundcards. I found that when I rebooted Jaws was still speaking through the Audiophile. Remembering that the FAQ mentioned closing and restarting JFW I did so but then could get know sound until I rebooted. Once Windows came back up, Jaws once again spoke through the Audiophile. I can now get Midi to play through the Audiophile, though it has about a 75 Milisecond delay. Could this delay be due to still having Jaws through the Audiophile? Also, I am having problems getting input from the device. 

Thanks again,
Ken



From: "William R. McCann" <BillList1@xxxxxxxxxxx>
Reply-To: ddots-l@xxxxxxxxxxxxx
To: <ddots-l@xxxxxxxxxxxxx>
Subject: [ddots-l] Re: Audiophile USB having problems with midi Out
Date: Wed, 27 Dec 2006 09:30:15 -0500

Hi, Ken,

Read the entry in our CakeTalking FAQ with the heading:
. Q: Is it possible to run JFW through my soundcard on my computer while
running my music through my external sound card?

You will find it at http://www.dancingdots.com/ctfaq.htm

Regards,
Bill


-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On 
Behalf Of Kenneth Spector
Sent: Tuesday, December 26, 2006 7:14 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Audiophile USB having problems with midi Out


     I just started using the Audiophile USB from MAudio, and so far it
hasn't been very cooperative. When I first open Sonar it says that there is 

an issue with the drivers being either incompatible or in use by another
program. I chose to use the driver anyway and everything seems to work fine
for playing audio, but when it comes to midi the Audiophile USB is remaining 

silent.  I have added it to the (Midi Devices) and have chosen to use the
Audiophile as my output on the track.  Any suggestions as to what might be
amiss?

Thanks,
Ken


** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq




** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq 



** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: