[softwarelist] Re: Interesting printing problem/solution
- From: David Pilling <flist@xxxxxxxxxxxxxxxxxxx>
- To: davidpilling@xxxxxxxxxxxxx
- Date: Sun, 9 Jan 2011 16:44:16 +0000
HI,
In message <5192f1bca3lists@xxxxxxxxxxxx>, Chris Bell
<lists@xxxxxxxxxxxx> writes
I've been battling to get an OvPro document to print correctly. It
contains text and drawfile images and displays correctly on-screen.
But printing results in half of the drawfiles and, bizarrely, half of
OvPro's text underlines being changed from a solid to a dashed
linestyle.
There is always the catch about "thin" lines i.e. zero width, which may
look OK on screen and near invisible on printers.
I would be inclined to try another printer driver e.g. my SPrinter (see
web site) which renders to a sprite.
It sounds like you're making a case for things getting into "dash mode",
and then staying in it, but that is not how RISC OS works for Draw
module output.
--
David Pilling
email: david@xxxxxxxxxxxxxxxxxxx
web: http://www.davidpilling.net
post: David Pilling, P.O. Box 22, Thornton-Cleveleys, Blackpool. FY5 1LR. UK
fax: +44(0)870-0520-941
To unsubscribe or subscribe goto: //www.freelists.org/list/davidpilling
Other related posts:
