Zack,
Which ones should be checked? I had a hard time figuring out which ones needed
to be checked and which ones did not need to be checked.
Thanks,
Jordan
Sent from my iPhone
On Feb 7, 2017, at 10:47 PM, Zachary Kline <zkline@xxxxxxxxxxxxx> wrote:
Jordan,
One thought, have you made sure the right ctrl+shift checkboxes are checked?
I noticed it was sometimes very hard to tell which boxes belonged with which
keys. I highly doubt the autotune setting would make a difference, as I have
it turned on, and the RC commands work for me.
Best,
Zack.
On Feb 7, 2017, at 8:45 PM, Jordan Gallacher <jordanandseptember@xxxxxxxxx>
wrote:
The only command I can consistently get to work is Get ATIS. Saying Contact
Clearance Delivery does nothing, RC4 stays on the ATIS frequency, which I
might try to switch off auto tuning in RC4 and see what happens.
Jordan
Sent from my iPhone
On Feb 7, 2017, at 10:32 PM, Zachary Kline <zkline@xxxxxxxxxxxxx> wrote:
Jordan,
When you say it isn’t working, what exactly works and what doesn’t? If we
have more specific information we can probably make suggestions. Do none of
the commands work, some of them, or something more unusual?
As far as I’m aware, the only change you need to make is indeed to set
those RC keystrokes and switch to RC4 mode in IYP.
Best,
Zack.
On Feb 7, 2017, at 8:30 PM, Jordan Gallacher
<jordanandseptember@xxxxxxxxx> wrote:
Could it be that the problem is that I have RC4 set to automatically tune
the frequencies? Trying to problem solve here since I know there is
something I clearly have missed.
Jordan