[bvipilots] Re: A IYP VA problem.
- From: Robert Cezar <robert@xxxxxxxxxxxxxxx>
- To: bvipilots@xxxxxxxxxxxxx
- Date: Sat, 5 May 2012 19:26:56 -0700
Hi Ron,
REGARDING: Since IYP will not load until a aircraft is out on the runway,
I usually do the following.
1. Usually with the red and gold cessna with the tail number of N760 PL.
I make sure I hear it's engines running.
2. I think go and fire up IYP.
3. I shut down the cessna.
4. I using the voice command open v a pannel and go down to select the
flight I would like to fly and click in the available button.
Then I get the option to close out the va pannel or to click here to start
everything running.
The fact that you have loaded a Cessna, engines running, etc., is
completely unnecessary. It makes no difference what aircraft or flight you
have loaded. It does not matter if the engines are running not. The system
cares not whether the plane is on the ground, or in mid-flight.
Having ANY flight loaded, with ANY aircraft, at ANY state, merely tells IYP
that the system is running properly.
Do NOT mess with the current disposition of the current flight. The
instructions read:
Close the VA panel, go to your simulator's menu, and load the IYP flight.
It does not say, close the VA panel, go to your simulator, shut down the
engines, turn on the landing lights, etc., THEN go to simulator's menu,
and load the IYP flight.
Just close the VA panel, go to your simulator's menu, and load the IYP
flight.
Now, after saying that., let me ask this question.
Are the instructions are not accessible with your reader?
If this is the case, then perhaps I need to have Michelle speak the entire
instructions out loud.
Please let me know.
Thanks.
Robert
On Sat, May 5, 2012 at 5:24 PM, Ron Kolesar <kolesar16417@xxxxxxxxxxxxxx>wrote:
> that’s what I’m trying to figrue out myself.
> Sorry.
>
> Ron and current Leader Dog boz who states
> "that a service dog beats a cane paws down any day of the week."
>
> *From:* Robert Cezar <robert@xxxxxxxxxxxxxxx>
> *Sent:* Saturday, May 05, 2012 8:13 PM
> *To:* bvipilots@xxxxxxxxxxxxx
> *Subject:* [bvipilots] Re: A IYP VA problem.
>
> Incidentally, you've been loading IYP-VA flights for a few days and they
> worked. What are you doing differently?
>
> r :)
>
> On Sat, May 5, 2012 at 5:12 PM, Robert Cezar <robert@xxxxxxxxxxxxxxx>wrote:
>
>> If it's at the top of the list, select it and press ENTER.
>>
>>
>> On Sat, May 5, 2012 at 4:57 PM, Ron Kolesar
>> <kolesar16417@xxxxxxxxxxxxxx>wrote:
>>
>>> Well Robert.
>>> I just checked the list of flights in the alt L field.
>>> My most recent attempt IYP 255 is at the top of the list.
>>> So this in the correct view option.
>>> What next?
>>> Thanks.
>>>
>>> Ron and current Leader Dog boz who states
>>> "that a service dog beats a cane paws down any day of the week."
>>>
>>> *From:* Robert Cezar <robert@xxxxxxxxxxxxxxx>
>>> *Sent:* Saturday, May 05, 2012 7:51 PM
>>> *To:* bvipilots@xxxxxxxxxxxxx
>>> *Subject:* [bvipilots] Re: A IYP VA problem.
>>>
>>> Hi,
>>>
>>> REGARDING: you've selected the wrong aircraft
>>>
>>> This means that you've selected the wrong flight.
>>>
>>> It likely means that you have the TITLE list sorted in descending order,
>>> instead of ascending order which will put the IYP flight at the very bottom
>>> of the list.
>>>
>>> Make sure that you are loading the IYP flight that starts with the
>>> string of characters like...
>>>
>>> _IYP
>>>
>>> r :)
>>>
>>> On Sat, May 5, 2012 at 4:08 PM, Ron Kolesar <kolesar16417@xxxxxxxxxxxxxx
>>> > wrote:
>>>
>>>> Hi to all.
>>>> Been attempting to link up with the IYP VA server.
>>>> I get to the point where it tells me that we need to synchronize to the
>>>> IYP VA server this might take a few minutes.
>>>> So I wait.
>>>> Then Michelle comes back and tells me that it looks like you've
>>>> selected the wrong aircraft please try again.
>>>> What am I doing wrong?
>>>> I usually do the following.
>>>> Since IYP will not load until a aircraft is out on the runway, I
>>>> usually do the following.
>>>> 1. Usually with the red and gold cessna with the tail number of N760 PL.
>>>> I make sure I hear it's engines running.
>>>> 2. I think go and fire up IYP.
>>>> 3. I shut down the cessna.
>>>> 4. I using the voice command open v a pannel and go down to select the
>>>> flight I would like to fly and click in the available button.
>>>> Then I get the option to close out the va pannel or to click here to
>>>> start everything running.
>>>> So I click on the clic here button.
>>>> I see that the va pannel brought me to the main page of FSX like if you
>>>> were going to go to the planner putton or to use the alt l to load a flight
>>>> and so on.
>>>> I go to use the alt l command and I get the normal message we need to
>>>> file your flight plan this might take a few minutes please wait.
>>>> So I wait then I hear it looks like you've selected the wrong aircraft.
>>>> Please try again.
>>>> Now I flown once.
>>>> Now how did I do it? GRIN.
>>>> Please help.
>>>> Thanks.
>>>>
>>>> Ron and current Leader Dog boz who states
>>>> "that a service dog beats a cane paws down any day of the week."
>>>> Blind and Visually impaired Pilots mailinglist
>>>> //www.freelists.org/list/**bvipilots<//www.freelists.org/list/bvipilots>
>>>> To post a message to the list, send a message to
>>>> bvipilots@xxxxxxxxxxxxx
>>>> To unsubscribe, send a message to
>>>> bvipilots-request@freelists.**org <bvipilots-request@xxxxxxxxxxxxx>and put
>>>> the word unsubscribe in the subject of your message.
>>>> For other options such as digest, send a message to
>>>> bvipilots-request@freelists.**org <bvipilots-request@xxxxxxxxxxxxx>and put
>>>> the word help in the subject of your message.
>>>>
>>>
>>>
>>>
>>> --
>>>
>>>
>>> AOPA Member No: 06936977
>>>
>>>
>>>
>>
>>
>>
>> --
>>
>>
>> AOPA Member No: 06936977
>>
>>
>>
>
>
>
> --
>
>
> AOPA Member No: 06936977
>
>
>
--
AOPA Member No: 06936977
Other related posts:
