[burpg] Re: Igniter Purge
- From: Cory Absi <cory.absi@xxxxxxxxx>
- To: "burpg@xxxxxxxxxxxxx" <burpg@xxxxxxxxxxxxx>
- Date: Wed, 9 Jul 2014 13:09:45 -0400
I can take care of the part that needs to be caded. Can someone else take care
of the compressor test?
-Cory
Sent from my iPhone
> On Jul 9, 2014, at 2:03 AM, Armor Harris <armorharris@xxxxxxxxx> wrote:
>
> Hey guys,
>
> Can somebody back at BU make a CAD model of one of the NPT to barbed hose
> connectors that we have in the vacuum cabinet?
>
> Second, can you pump up the air compressor and set the regulator to 50 psi,
> then time how long it takes to drain to a) the point where it drops below 50
> psi, b) till it gets down to like 20 psi?
>
> We need about 10 seconds of ~50 psi inert gas flow for the injector/igniter
> (iPurge anyone?) purge. If we can't achieve it with the air compressor we'll
> have to fill some other tank we have sitting around with enough nitrogen and
> put a reg on it to get 50 psi for 10 sec.
>
> We could the Mk IV tank. It already has the valve (E-reg) on the end of it to
> control it...
>
> Thanks,
> Armor
Other related posts:
