Didn't we see some messages from folks back around the first of the year that they were having problems with the d e f command not working? I don't remember if a solution was found back then or not. ----- Original Message ----- From: "Walt Smith" <walt@xxxxxxxxxx> To: <bookport@xxxxxxxxxxxxx> Sent: Tuesday, April 18, 2006 8:03 AM Subject: [bookport] Re: Two Questions : I'm also encountering problems with the latest firmware when it comes to : changing batteries and I've never had this kind of issue come up before. : Like Caroline, D+E+F only emits a double beep for me (no message) and even : when I know that I've got the batteries swapped in well under 20 seconds, : the defaults are always restored and my original settings are not being : retained. In more than a year and a half of experience with the BP, this is : the first time I've regularly been unable to either save settings using : D+E+F or maintain them by means of a quick battery swap. : : ----- Original Message ----- : From: "Caroline Congdon" <carolinecongdon@xxxxxxxxx> : To: <bookport@xxxxxxxxxxxxx> : Sent: Monday, April 17, 2006 10:13 PM : Subject: [bookport] Two Questions : : : Hi everyone. I'm curious about a couple of things. : : First, a couple of weeks back before I got my BP, someone wrote to the list : saying that each time they replaced their batteries their settings were not : retained although they changed the batteries in less than the 30 second time : limit. I am also running into this situation, and have both times that I've : changed my batteries so far. I hit D,E,F together to save the settings and : hear nothing accept for the two beeps indicating that BP has turned off. I : hold the unit in front of me without laying it down on a table so that none : of the buttons are being pressed and remove the batteries. Before removing : the old batteries I have the new batteries in my hand so that I can : immediately put in the new set, but as soon as the new set is put in I hear : the message "Defaults restored; book Port ready, version 2.2." Am I missing : something somewhere? Unlike doing the 2,b command, removing and replacing : the batteries even resets my clock to some strange time. I know I'm : definitely doing the switch in less than 30 seconds. : : My second question relates to the transfer software and batteries. I am : admittedly fairly clueless when it comes to power consumption but I've : noticed something that seems sort of weird to me. If I have a fresh set of : batteries in the unit and connect to the computer there seems to be very : little battery loss. However, if my batteries are a bit lower, (tonight : they were somewhere between 40 and 45 percent), and I plug in there seems to : be a very significant battery drain. I was told after unplugging that my : batteries were low and needed to be replaced, and the percentage was : reported at 20 percent or so. Is there a particular reason for this or am I : imagining things? Thanks in advance. : : Caroline : : : Caroline Congdon; Milwaukee, Wisconsin : Check out my blog at : http://ccongdon.wordpress.com : or add me to your Livejournal friends list with username tazcat : mailto:carolinecongdon@xxxxxxxxx : : : : : -- : No virus found in this incoming message. : Checked by AVG Free Edition. : Version: 7.1.385 / Virus Database: 268.4.4/318 - Release Date: 4/18/2006 : :