James: Yes. Those keys are correct. Once you type in the information and press = enter, then you need to turn it around and press the 8 and 9 keys together = to activate the "find" command.=20 This only works with the latest firmware, which you would have had to have = updated yourself. The version number is 1.20 Check again, and make sure = that's what you have. If it indeed says, "1.02, then you will need to = update that.=20 >>> james.jolley1@xxxxxxxxxxxxxx 10/20/04 01:30PM >>> Hi again, Did Walt get the keystrokes coreect then? Best -James- ----- Original Message -----=20 From: "James Jolley" <james.jolley1@xxxxxxxxxxxxxx> To: <bookport@xxxxxxxxxxxxx> Sent: Wednesday, October 20, 2004 6:29 PM Subject: [bookport] Re: Braille again > Hi, > > It says: > Version 01.02.00 > > ----- Original Message -----=20 > From: "LARRY SKUTCHAN" <lskutchan@xxxxxxx> > To: <bookport@xxxxxxxxxxxxx> > Sent: Wednesday, October 20, 2004 6:17 PM > Subject: [bookport] Re: Braille again > > >> James: >> >> Which version of the firmware are you using? If you press a+c, the = unit=20 >> =3D >> will say the number, or you can hit reset (2+b) and it will say = something >> =3D >> like Book Port 1.2 ready. >> >> >>>>> james.jolley1@xxxxxxxxxxxxxx Wednesday, October 20, 2004 1:05:26 PM = =3D >>>>> >> Hi, >> >> Still no joy. >> >> Madness isn't it >> >> -James- >> ----- Original Message -----=3D20 >> From: "Walt Smith" <walt@xxxxxxxxxx> >> To: <bookport@xxxxxxxxxxxxx> >> Sent: Wednesday, October 20, 2004 5:41 PM >> Subject: [bookport] Re: Braille again >> >> >>> Or, to translate directly to the Book Port key names (remember that = the=20 >>> =3D >> BP >>> should be turned so that the CompactFlash card is nearest to you), = to=3D20 >>> press >>> an F CHORD: >>> >>> Left Shift =3D3D The F key >>> Dot 1 =3D3D the star (*) key >>> Dot 2 =3D3D the A key >>> Dot 4 =3D3D the 7 key >>> >>> Press all four keys simultaneously. Remember...these are all the Book = =3D >> Port >>> key names to the right of the equals sign. >>> >>> And I sure hope I got these right! <g> >>> >>> ----- Original Message -----=3D20 >>> From: "LARRY SKUTCHAN" <lskutchan@xxxxxxx> >>> To: <bookport@xxxxxxxxxxxxx> >>> Sent: Wednesday, October 20, 2004 12:26 PM >>> Subject: [bookport] Re: Braille again >>> >>> >>> It is left shift+ dots 124 (f). >>> >>> >>>>>> james.jolley1@xxxxxxxxxxxxxx Wednesday, October 20, 2004 12:19:26 = PM=20 >>>>>> =3D >> =3D3D >>>>>> >>> Hi Folks, >>> Still can't get the braille input side of searching to work. could = =3D3D >>> someone off list just give me the exact keys I should press for an f = =3D3D >>> chord, i've tried all sorts and gotten no ware. >>> >>> Best >>> >>> -James- >>> >>> >>> >>> >>> >>>=3D20 >> >> >> >> >> >> > > > >=20