James: Which version of the firmware are you using? If you press a+c, the unit = will say the number, or you can hit reset (2+b) and it will say something = like Book Port 1.2 ready. >>> james.jolley1@xxxxxxxxxxxxxx Wednesday, October 20, 2004 1:05:26 PM = >>> Hi, Still no joy. Madness isn't it -James- ----- Original Message -----=20 From: "Walt Smith" <walt@xxxxxxxxxx> To: <bookport@xxxxxxxxxxxxx> Sent: Wednesday, October 20, 2004 5:41 PM Subject: [bookport] Re: Braille again > Or, to translate directly to the Book Port key names (remember that the = BP > should be turned so that the CompactFlash card is nearest to you), to=20 > press > an F CHORD: > > Left Shift =3D The F key > Dot 1 =3D the star (*) key > Dot 2 =3D the A key > Dot 4 =3D the 7 key > > Press all four keys simultaneously. Remember...these are all the Book = Port > key names to the right of the equals sign. > > And I sure hope I got these right! <g> > > ----- Original Message -----=20 > From: "LARRY SKUTCHAN" <lskutchan@xxxxxxx> > To: <bookport@xxxxxxxxxxxxx> > Sent: Wednesday, October 20, 2004 12:26 PM > Subject: [bookport] Re: Braille again > > > It is left shift+ dots 124 (f). > > >>>> james.jolley1@xxxxxxxxxxxxxx Wednesday, October 20, 2004 12:19:26 PM = =3D >>>> > Hi Folks, > Still can't get the braille input side of searching to work. could =3D > someone off list just give me the exact keys I should press for an f =3D > chord, i've tried all sorts and gotten no ware. > > Best > > -James- > > > > > >=20