[bookport] Re: BookPort not recognized by computer
- From: "PAMELA RADER" <PRADER@xxxxxxx>
- To: <bookport@xxxxxxxxxxxxx>
- Date: Mon, 04 Oct 2004 09:04:54 -0400
Jim:
If you haven't already, you might try a different flash card
Otherwise, it's probably time to reformat your flash card. I'm not sure =
what caused the problem, but this will usually fix things. The Reformat =
command is 1 plus 3 plus d plus f together. If that doesn't work, then you =
should try another one, before we go any further.=20
Pamela
>>> jnuttallphd@xxxxxxxxxxxxx 10/04/04 08:50AM >>>
My BookPort has gone haywire. My batteries ran low so I took a new set of =
batteries and install them in the BookPort. When I restarted my BookPort =
it said "no files", even though there were files originally on the memory =
card. I hooked the BookPort up to my computer. The computer beeped =
acknowledging a device being hooked up. However when I opened the book =
for transfer program. The program said the BookPort was not connected to =
the computer. I have removed the batteries and reinstall them. This is =
not reset the BookPort or corrected the problem.
=20
Can anyone give me help on this?
=20
Jim Nuttall -- East Lansing, Michigan
Other related posts:
