[bookport] Re: BP doesn't auto-open Transfer Program
- From: "Robert C" <rclark0276@xxxxxxxxxxx>
- To: <bookport@xxxxxxxxxxxxx>
- Date: Fri, 24 Sep 2010 15:12:07 -0700
Rick,
That should work for each new card you want to use. The BP will then be
able to work with the card.
Quote of the nanosecond. . .
Nothing is illegal if one hundred businessmen decide to do it.
--Andrew Young, author, civil rights activist, US congressman, mayor, and
UN ambassador (b. 1932 -)
Robert & Dreamer Doll ke7nwn
E-mail-
rclark0276@xxxxxxxxxxx
Home Page-
http://webpages.charter.net/dog_guide/
----- Original Message -----
From: "Rick Hume" <Ringmaster.Rick@xxxxxxxxx>
To: <bookport@xxxxxxxxxxxxx>
Sent: Friday, September 24, 2010 1:42 PM
Subject: [bookport] Re: BP doesn't auto-open Transfer Program
Hello Pamela,
Thank you very much for this information. I hadn't run across this
previously, and I thought I'd read over the help files at least 3 times. I
don't know how I missed it.
One question I have, however, is this all I will have to do when I want to
make use of a new card. I have purchased 3 new 2 GIG cards to use with the
player.
**Previous Message**
The original card is working correctly, then. When you connect, it's
supposed to open the software.
If the new card is not doing that, then perhaps you need to reformat the
card.
Disconnect from the PC and press all 4 corners on your Book Port. Press
again to confirm.
After that, hook it back to the PC and see what happens.
Pamela
From: bookport-bounce@xxxxxxxxxxxxx [mailto:bookport-bounce@xxxxxxxxxxxxx]
On Behalf Of Rick Hume
Sent: Friday, September 24, 2010 3:53 PM
To: bookport@xxxxxxxxxxxxx
Subject: [bookport] Re: BP doesn't auto-open Transfer Program
does this happen with any other card?When I have the original card in, it
automatically opens the transfer program when I plug the book Port into the
computer. When I plug in the Book Port with the new flash card, nothing
happens, other than the audible beep that lets you know that the circuit is
complete between the Book Port and computer.
Check your startup folder in start menu / programs, tell me if bookport
launcher is listed there. That's a little program which runs in the
background and waits for the book port to be connected, then automatically
opens book port transfer when it detects the device. If bookport launcher is
not running, this won't work, and furthermore, bookport transfer won't even
detect the book port once you launch it. If you need to, write back to the
list and I'll give you instructions on how to get that back up and running.
There is no program shown in StartMenu/Programs called Program Launcher.
Is it necessary, as the original card seems to launch the transfer program.
Other related posts:
