This is the only computer I own. Sent from my iPhone > On Dec 9, 2013, at 8:46 PM, "Petro T. Giannakopoulos" <petrogia@xxxxxxxxx> > wrote: > > I know another GW Micro Window Eyes user who experienced the same issue as > you are having. She was able to use Replay media Catcher 5 on her notebook > computer but not on her PC computer even though she was using Window Eyes on > both. Do you have a 2nd computer that you can use and try Replay Media > Catcher 5 while you wait for Jeff to assist you. > > > ----- Original Message ----- > From: Janie Landrum > To: blindreplay@xxxxxxxxxxxxx > Sent: Monday, December 09, 2013 8:28 PM > Subject: [blindreplay] Re: Replay Media Catcher 5 Helpful Notes > > I will be glad to wait. I am in no rush. Thank you so much for your help. > > Sent from my iPhone > >> On Dec 9, 2013, at 8:08 PM, "Petro T. Giannakopoulos" <petrogia@xxxxxxxxx> >> wrote: >> >> Please wait to hear from Jeff at Applian. He should help you with this. >> >> >> >> ----- Original Message ----- >> From: Janie Landrum >> To: blindreplay@xxxxxxxxxxxxx >> Sent: Monday, December 09, 2013 7:12 PM >> Subject: [blindreplay] Re: Replay Media Catcher 5 Helpful Notes >> >> No captures. I think it is in window eyes I keep losing speech. Maybe I >> should go back to version 4. >> >> Sent from my iPhone >> >>> On Dec 9, 2013, at 6:31 PM, "Petro T. Giannakopoulos" <petrogia@xxxxxxxxx> >>> wrote: >>> >>> Are you getting captures? Check your Library list view. Do not be concerned >>> with sound beeps for now. Press enter on Library control on main UI. Press >>> alt+l for the library menu, choose settings. Check to be sure the checkbox >>> for sound effects is check marked. >>> >>> >>> >>> >>> >>> ----- Original Message ----- >>> From: Janie Landrum >>> To: blindreplay@xxxxxxxxxxxxx >>> Sent: Monday, December 09, 2013 5:12 PM >>> Subject: [blindreplay] Re: Replay Media Catcher 5 Helpful Notes >>> >>> Hello, I have tried both ways still no sound. >>> >>> Sent from my iPhone >>> >>>> On Dec 9, 2013, at 4:47 PM, "Life My Way" <lifemyway@xxxxxxxxx> wrote: >>>> >>>> try this instead, where it says start monitaring press your enter key on >>>> it. >>>> or do alt i and down arrow to start monitaring and enter. you should hear >>>> the start sound. >>>> these methods can be used for any screen reader. >>>> >>>> ----- Original Message ----- >>>> From: Petro T. Giannakopoulos >>>> To: blindreplay@xxxxxxxxxxxxx >>>> Sent: Monday, December 09, 2013 3:13 PM >>>> Subject: [blindreplay] Re: Replay Media Catcher 5 Helpful Notes >>>> >>>> Do you have Skype? >>>> Try using your Window Eyes left mouse click on where it reads click to >>>> start monitoring and let us know how it goes. >>>> >>>> Tab and shift+tab back to the button and it should read as stop monitoring. >>>> >>>> ----- Original Message ----- >>>> From: Janie Landrum >>>> To: blindreplay@xxxxxxxxxxxxx >>>> Sent: Monday, December 09, 2013 3:53 PM >>>> Subject: [blindreplay] Re: Replay Media Catcher 5 Helpful Notes >>>> >>>> Hello, Thank you for the help. I still can not get it to record. I >>>> followed your directions to the letter. Still no go. How long should I >>>> wait for the tone? I am using window eyes version 8.3. And a laptop. If >>>> you have any more suggestions please let me know. >>>> >>>> Sent from my iPhone >>>> >>>>> On Dec 8, 2013, at 3:50 PM, "Petro T. Giannakopoulos" >>>>> <petrogia@xxxxxxxxx> wrote: >>>>> >>>>> Here are my notes for Replay Media Catcher 5. >>>>> >>>>> Replay Media Catcher 5 >>>>> >>>>> Installation >>>>> No issues experienced with installation process. >>>>> >>>>> Welcome >>>>> >>>>> When you first run Replay Media Catcher 5 you will hear a welcome window. >>>>> >>>>> Choose the checkbox with spacebar to enable it and tab over >>>>> to the OK button and press ENTER key. >>>>> >>>>> You don't need this welcome window. >>>>> >>>>> This application has different interfaces. >>>>> >>>>> Start Monitoring >>>>> >>>>> Use alt-s >>>>> >>>>> Stop Monitoring >>>>> >>>>> alt-x >>>>> >>>>> Read the user guide. >>>>> >>>>> If you have scheduled a future capture / Download but have forgotten to >>>>> run the Replay Media Catcher 5 program, no problem because Replay Media >>>>> Catcher 5 will open itself and start the recording for you. >>>>> >>>>> Configuring The Main Interface >>>>> >>>>> With Replay Media Catcher running you should configure your >>>>> main interface, the UI by >>>>> >>>>> Press enter key on Library tab/module >>>>> >>>>> Press alt+v for the View toolbar menu >>>>> >>>>> Press enter keyboard key on everything located in the view toolbar that >>>>> does not have a check mark next to it except for 'always on top'. >>>>> >>>>> This will show all the modules/tabs that are available on the main user >>>>> interface. They are >>>>> >>>>> Library >>>>> >>>>> Internet >>>>> >>>>> Audio >>>>> >>>>> History >>>>> >>>>> Guides >>>>> >>>>> Schedule >>>>> >>>>> The most important modules/tabs are, >>>>> >>>>> Library >>>>> >>>>> Internet >>>>> >>>>> Audio >>>>> >>>>> Schedule >>>>> >>>>> When you are done go back with alt+v and make sure everything is checked >>>>> except for >>>>> >>>>> the always on top. >>>>> >>>>> JAWS Keystrokes for the List View >>>>> >>>>> If you are in another module/tab please >>>>> >>>>> Press enter keyboard key on the Library module/tab on the main user >>>>> interface. >>>>> >>>>> Shift+tab will bring you to the Library list view >>>>> >>>>> If you have captured something you can do the steps below but if not >>>>> please read on. >>>>> >>>>> While in the list view you can use the following JAWS keystrokes to hear >>>>> >>>>> Name of your recording >>>>> >>>>> Date >>>>> >>>>> Status >>>>> >>>>> To hear the name press >>>>> >>>>> insert+ctrl+numbers row 1 >>>>> >>>>> To hear the date press >>>>> >>>>> insert+ctrl+numbers row 2 >>>>> >>>>> To hear the status of your recording/download while in the list view press >>>>> >>>>> insert+ctrl+numbers row 3 >>>>> >>>>> The status will say downloading, complete and other info like error. >>>>> >>>>> To hear the whole line press insert+up arrow. >>>>> >>>>> Display the List view >>>>> >>>>> Will make it much easier for you. >>>>> >>>>> Choose the Library module/tab with ENTER key. >>>>> >>>>> Press insert+t - the title bar should say library >>>>> >>>>> Press alt+L to bring up the library toolbar >>>>> >>>>> Choose display list view if it is not checked with your enter key >>>>> >>>>> You have made the list view the default view on the main user interface >>>>> >>>>> OR >>>>> >>>>> Choose the Library module/tab. >>>>> >>>>> Use your tab keyboard key and locate the 'Display List View' button and >>>>> press your enter key. >>>>> >>>>> Settings and Conversions Settings >>>>> >>>>> Choose the Library module/tab on main interface. >>>>> >>>>> Press alt+l. >>>>> >>>>> The library menu has the >>>>> >>>>> Settings >>>>> >>>>> Conversions Settings >>>>> >>>>> Choose Settings >>>>> >>>>> The settings window opens >>>>> >>>>> You should hear Settings tab >>>>> >>>>> Use left or right arrow keyboard key to find the tab sheet you want to >>>>> configure and press your ENTER keyboard to make it the active tab. >>>>> >>>>> Some main level tabs have sub level tabs so press your tab keyboard key >>>>> one time to find its sub level tabs. >>>>> >>>>> Use left or right arrow keyboard key to find the sub level tab sheet you >>>>> want to configure and press your ENTER keyboard to make it the active tab. >>>>> >>>>> For example, the Internet tab sheet has the sub level tabs Monitor, >>>>> plug-ins, rtmp, http and some others. >>>>> >>>>> The Settings Window has >>>>> >>>>> Library tab >>>>> >>>>> Internet tab >>>>> >>>>> Audio tab >>>>> >>>>> History tab >>>>> >>>>> For me the Library tab says checked. so I know I am in the Library tab >>>>> property sheet properties which I can examine by pressing my tab keyboard >>>>> key each time one by one. >>>>> >>>>> While on a control within the tab sheet that is active insert+tab will >>>>> read that control for you. >>>>> >>>>> Say you want to view the Internet tab sheet simply use the right arrow >>>>> key to find the internet tab and when you find it press your ENTER key >>>>> and JAWS will say checked. >>>>> >>>>> The Internet tab is active. >>>>> >>>>> You know now that you are in the Internet tab property sheet so press >>>>> your tab keyboard key to jump to the different settings you can configure. >>>>> >>>>> Note, the Internet tab sheet has some additional sub level tab sheets >>>>> within it. >>>>> >>>>> They are, >>>>> >>>>> Monitor >>>>> >>>>> http tab, >>>>> >>>>> http adv tab, >>>>> >>>>> rtmp tab, >>>>> >>>>> rtmp adv tab, >>>>> >>>>> dynamic tab >>>>> >>>>> BT tab, >>>>> >>>>> Naming tab, >>>>> >>>>> Plugins tab, >>>>> >>>>> ad blocker tab >>>>> >>>>> These are tabs above so if you need to configure something within one of >>>>> these you will have to see which one is selected by >>>>> hearing the word checked pronounced by your screen reader. >>>>> >>>>> For me the Monitor tab is checked. JAWS tells you it is by it speaking >>>>> Monitor tab checked. >>>>> >>>>> Want to go to a different tab then use the steps above. >>>>> >>>>> Start Monitoring >>>>> >>>>> To start a capture of your media like a radio station stream do >>>>> >>>>> Three methods >>>>> >>>>> Press alt-s to start monitoring. >>>>> >>>>> Or >>>>> >>>>> Choose the Library module/tab on main interface. >>>>> >>>>> Locate the click to Start Monitoring for downloads button on the main >>>>> user interface and press enter keyboard key. >>>>> >>>>> You will hear a sound. This sound is telling you its ready to >>>>> capture/download. >>>>> >>>>> If you do not see the 'start monitoring' on the main UI then you are not >>>>> in the Library module/tab so do >>>>> >>>>> Press your tab key a few times until you land on the Library module/tab >>>>> and press your enter key on it. >>>>> >>>>> Use your TAB keyboard key to find the click to start monitoring for >>>>> downloads button. >>>>> >>>>> This will enable the click to start monitoring for downloads button to >>>>> appear again. Press enter key on start monitoring. Sound is heard. >>>>> >>>>> Still do not hear the start monitoring feature then do >>>>> >>>>> Find the Library module/tab on main UI and press enter. >>>>> >>>>> Press alt+l for the library toolbar. >>>>> >>>>> The Library toolbar appears. >>>>> >>>>> Arrow down to the item 'start monitoring' and press your enter key on it. >>>>> >>>>> Sound will be heard. >>>>> >>>>> Before you proceed to your media on the web I would tab over to the >>>>> Library list view on the main interface, minimize Replay Media Catcher or >>>>> alt+tab to your browser like Internet Explorer. >>>>> >>>>> For example, play a YouTube video for 10-15 seconds and stop it with >>>>> either the stop button or alt+F4 to close your browser. >>>>> >>>>> Now go back to Replay Media Catcher application and you should be focused >>>>> on the list view. >>>>> >>>>> The list view will display your recordings/captures/downloads you have in >>>>> a list view style. >>>>> >>>>> Playback a file that is located within the list view. >>>>> >>>>> Locate the listview. If you do not see it. >>>>> >>>>> Press enter on the Library module/tab . >>>>> >>>>> Tab key a few times on the main UI and you will find the display list >>>>> view button. Press enter. >>>>> >>>>> OR >>>>> >>>>> Press alt+l for the Library toolbar and make sure display listview is >>>>> checked. >>>>> >>>>> Locate the list view contents on main interface with the tab key. When >>>>> you find it your recordings/downloads will show up in the list view. >>>>> >>>>> Press shift+F10 on a file in the listview. >>>>> >>>>> You can do >>>>> >>>>> Delete a file. >>>>> >>>>> Rename >>>>> >>>>> Remove >>>>> >>>>> Play >>>>> >>>>> Move To >>>>> >>>>> Convert >>>>> >>>>> Save to MP3 >>>>> >>>>> Fix FLV >>>>> >>>>> Restart >>>>> >>>>> Show in folder >>>>> >>>>> Properties >>>>> >>>>> Cancel >>>>> >>>>> So to play a file press shift+F10 while on a file in the listview and >>>>> choose PLAY in the context menu. >>>>> >>>>> If you are asked to download a player to play a file it is your judgement >>>>> to decide what to do here but if you've played that file type before than >>>>> choose NO when the pop up message appears. >>>>> >>>>> You can play your files through the Windows Explorer. >>>>> >>>>> Where are my files? >>>>> >>>>> On main UI press enter on Library module/tab. >>>>> >>>>> Press alt+l. >>>>> >>>>> Choose open strorage folder. >>>>> >>>>> Conversion Setting >>>>> >>>>> If you want Replay Media Catcher to auto convert everything to a >>>>> particular format then do, >>>>> >>>>> On the main UI press enter on Library module/tab. Press your tab key a >>>>> few times and locate the No Conversion Settings >>>>> >>>>> Next press your spacebar key and down arrow key and you will hear the >>>>> context menu with submenus, >>>>> >>>>> Media Players >>>>> >>>>> Phones >>>>> >>>>> Tablets >>>>> >>>>> Game Consoles >>>>> >>>>> Manufacturers >>>>> >>>>> Formats >>>>> >>>>> Output Folder >>>>> >>>>> Don't Convert >>>>> >>>>> Configure >>>>> >>>>> Import into iTunes >>>>> >>>>> Example, choose the Formats submenu and right arrow to open it. Choose >>>>> the format you desire within this list and press enter. >>>>> >>>>> I chose MP3 Default in this list and press enter. >>>>> >>>>> Tab over to Ok and press enter. >>>>> >>>>> Now when you are back on the main UI of Replay Media Catcher 5 you will >>>>> see the format type you chose instead of No Conversion Type displayed. >>>>> >>>>> If you do not see this then tab one time and then shift+tab. >>>>> >>>>> For me it reads on the main UI Mp3 Defaults (MP3). >>>>> >>>>> We are telling Replay Media Catcher 5 to automatically convert all >>>>> captures/recordings/downloads whether they are audio or video to MP3 >>>>> format in my example above. So if your video was .flv or mp4 Replay Media >>>>> Catcher 5 is going to convert to .mp3 and also keep the original file >>>>> .flv or .mp4 also as shown in this example. >>>>> >>>>> You will have the original file and the converted file in both the list >>>>> view and Windows Explorer. >>>>> >>>>> Example, >>>>> >>>>> WGN.flv >>>>> >>>>> WGN.mp3 >>>>> >>>>> How to Record Audio >>>>> >>>>> Choose Library tab on main user interface. >>>>> >>>>> Press your tab key a few times until you hear the Download from the >>>>> Internet button menu. >>>>> >>>>> Press spacebar key on Download from the Internet menu button. >>>>> >>>>> Press your down arrow key and when you hear Record Audio press your enter >>>>> key. >>>>> >>>>> Record Audio is now the default. >>>>> >>>>> Tab over one time. >>>>> >>>>> You will hear Start Recording button. >>>>> >>>>> Press the Start Recording button with enter key. >>>>> >>>>> Play your media like with your browser. >>>>> >>>>> Your audio is being captured. >>>>> >>>>> To view what is being captured go to the Replay Media Catcher Library >>>>> list view contents. >>>>> >>>>> When done close your browser. >>>>> >>>>> To stop recording press the stop recording button. >>>>> >>>>> To change it back to Download from the Internet button menu simply >>>>> spacebar on Record Audio and down arrow to Download from the Internet and >>>>> press enter. >>>>> >>>>> If you cannot escape from here then do an alt+tab anb shift+tab to go >>>>> back to Replay Media Catcher 5. >>>>> >>>>> You will notice that the Start Recording button has changed back to Click >>>>> To Start Monitoring For Downloads button when Download from the Internet >>>>> is active. >>>>> >>>>> Developer wrote >>>>> >>>>> RMC5 is a different product, with a modern interface and far more >>>>> features than anything AV or RMC4 had. >>>>> >>>>> Understanding Replay Media Catcher >>>>> >>>>> Below where it reads 'selected' means to press your keyboard enter key on >>>>> the module/tab. >>>>> >>>>> Settings / Conversion Settings / Display Listview / Open Storage Folder >>>>> menu item is under the Library menu which is displayed >>>>> when the main Library tab/module is selected >>>>> >>>>> Shortcut is >>>>> >>>>> alt+l >>>>> >>>>> Start/Stop recording menu item is under the Internet menu which is >>>>> displayed when the main Internet tab/module is >>>>> selected. Internet menu/toolbar shortcut is >>>>> >>>>> alt+i >>>>> >>>>> New Schedule menu item is under the Schedule menu which is displayed when >>>>> the Schedule tab/module is selected >>>>> >>>>> Shortcut is alt+s >>>>> >>>>> New - this is where you set timer style recording. >>>>> >>>>> Edit >>>>> >>>>> Copy >>>>> >>>>> Delete >>>>> >>>>> Run Now >>>>> >>>>> Most menu items have keyboard short cuts where it makes sense >>>>> >>>>> The Schedule Module/Tab and how to set a scheduled recording. >>>>> >>>>> On Main UI press enter on Schedule Module/tab. >>>>> >>>>> Use tab key to find the schedule for a future time button on main UI. >>>>> >>>>> Press ENTER kER key. >>>>> >>>>> Schedule window >>>>> >>>>> To find your list of scheduled future recordings you must be in the >>>>> Schedule module/tab. >>>>> >>>>> So on main UI of Replay Media Catcher 5 find the schedule module/tab and >>>>> press enter key. >>>>> >>>>> Then tab until you find the Scheduled list view contents. Here you will >>>>> see your list of scheduled recordings you have set for a future time >>>>> period. >>>>> >>>>> >>>>> ----- Original Message ----- >>>>> From: Janie Landrum >>>>> To: blindreplay@xxxxxxxxxxxxx >>>>> Sent: Sunday, December 08, 2013 12:22 PM >>>>> Subject: [blindreplay] Re: My Audio Tutorials >>>>> >>>>> Hi, Can you please email me your audio tutorial link for replay media >>>>> catcher version 5.0.1.1.9. I am having trouble getting mine to work >>>>> properly. I have been using replay catcher for years and love it. But >>>>> this version is giving me trouble. Any help would be appreash >>>>> >>>>> Sent from my iPhone >>>>> >>>>>> On Dec 8, 2013, at 11:33 AM, "Petro T. Giannakopoulos" >>>>>> <petrogia@xxxxxxxxx> wrote: >>>>>> >>>>>> Hi All >>>>>> Will be removing my audio tutorials on December 8 from Dropbox which >>>>>> will mean the Dropbox links will not work when they are clicked on. I >>>>>> will put these audio tutorials back up on Monday, December 9. >>>>>> >>>>>>