Hello, Thank you for the help. I still can not get it to record. I followed your directions to the letter. Still no go. How long should I wait for the tone? I am using window eyes version 8.3. And a laptop. If you have any more suggestions please let me know. Sent from my iPhone > On Dec 8, 2013, at 3:50 PM, "Petro T. Giannakopoulos" <petrogia@xxxxxxxxx> > wrote: > > Here are my notes for Replay Media Catcher 5. > > Replay Media Catcher 5 > > Installation > No issues experienced with installation process. > > Welcome > > When you first run Replay Media Catcher 5 you will hear a welcome window. > > Choose the checkbox with spacebar to enable it and tab over to the OK button > and press ENTER key. > > You don't need this welcome window. > > This application has different interfaces. > > Start Monitoring > > Use alt-s > > Stop Monitoring > > alt-x > > Read the user guide. > > If you have scheduled a future capture / Download but have forgotten to run > the Replay Media Catcher 5 program, no problem because Replay Media Catcher 5 > will open itself and start the recording for you. > > Configuring The Main Interface > > With Replay Media Catcher running you should configure your main interface, > the UI by > > Press enter key on Library tab/module > > Press alt+v for the View toolbar menu > > Press enter keyboard key on everything located in the view toolbar that does > not have a check mark next to it except for 'always on top'. > > This will show all the modules/tabs that are available on the main user > interface. They are > > Library > > Internet > > Audio > > History > > Guides > > Schedule > > The most important modules/tabs are, > > Library > > Internet > > Audio > > Schedule > > When you are done go back with alt+v and make sure everything is checked > except for > > the always on top. > > JAWS Keystrokes for the List View > > If you are in another module/tab please > > Press enter keyboard key on the Library module/tab on the main user > interface. > > Shift+tab will bring you to the Library list view > > If you have captured something you can do the steps below but if not please > read on. > > While in the list view you can use the following JAWS keystrokes to hear > > Name of your recording > > Date > > Status > > To hear the name press > > insert+ctrl+numbers row 1 > > To hear the date press > > insert+ctrl+numbers row 2 > > To hear the status of your recording/download while in the list view press > > insert+ctrl+numbers row 3 > > The status will say downloading, complete and other info like error. > > To hear the whole line press insert+up arrow. > > Display the List view > > Will make it much easier for you. > > Choose the Library module/tab with ENTER key. > > Press insert+t - the title bar should say library > > Press alt+L to bring up the library toolbar > > Choose display list view if it is not checked with your enter key > > You have made the list view the default view on the main user interface > > OR > > Choose the Library module/tab. > > Use your tab keyboard key and locate the 'Display List View' button and press > your enter key. > > Settings and Conversions Settings > > Choose the Library module/tab on main interface. > > Press alt+l. > > The library menu has the > > Settings > > Conversions Settings > > Choose Settings > > The settings window opens > > You should hear Settings tab > > Use left or right arrow keyboard key to find the tab sheet you want to > configure and press your ENTER keyboard to make it the active tab. > > Some main level tabs have sub level tabs so press your tab keyboard key one > time to find its sub level tabs. > > Use left or right arrow keyboard key to find the sub level tab sheet you want > to configure and press your ENTER keyboard to make it the active tab. > > For example, the Internet tab sheet has the sub level tabs Monitor, plug-ins, > rtmp, http and some others. > > The Settings Window has > > Library tab > > Internet tab > > Audio tab > > History tab > > For me the Library tab says checked. so I know I am in the Library tab > property sheet properties which I can examine by pressing my tab keyboard key > each time one by one. > > While on a control within the tab sheet that is active insert+tab will read > that control for you. > > Say you want to view the Internet tab sheet simply use the right arrow key to > find the internet tab and when you find it press your ENTER key and JAWS will > say checked. > > The Internet tab is active. > > You know now that you are in the Internet tab property sheet so press your > tab keyboard key to jump to the different settings you can configure. > > Note, the Internet tab sheet has some additional sub level tab sheets within > it. > > They are, > > Monitor > > http tab, > > http adv tab, > > rtmp tab, > > rtmp adv tab, > > dynamic tab > > BT tab, > > Naming tab, > > Plugins tab, > > ad blocker tab > > These are tabs above so if you need to configure something within one of > these you will have to see which one is selected by hearing the word checked > pronounced by your screen reader. > > For me the Monitor tab is checked. JAWS tells you it is by it speaking > Monitor tab checked. > > Want to go to a different tab then use the steps above. > > Start Monitoring > > To start a capture of your media like a radio station stream do > > Three methods > > Press alt-s to start monitoring. > > Or > > Choose the Library module/tab on main interface. > > Locate the click to Start Monitoring for downloads button on the main user > interface and press enter keyboard key. > > You will hear a sound. This sound is telling you its ready to > capture/download. > > If you do not see the 'start monitoring' on the main UI then you are not in > the Library module/tab so do > > Press your tab key a few times until you land on the Library module/tab and > press your enter key on it. > > Use your TAB keyboard key to find the click to start monitoring for downloads > button. > > This will enable the click to start monitoring for downloads button to appear > again. Press enter key on start monitoring. Sound is heard. > > Still do not hear the start monitoring feature then do > > Find the Library module/tab on main UI and press enter. > > Press alt+l for the library toolbar. > > The Library toolbar appears. > > Arrow down to the item 'start monitoring' and press your enter key on it. > > Sound will be heard. > > Before you proceed to your media on the web I would tab over to the Library > list view on the main interface, minimize Replay Media Catcher or alt+tab to > your browser like Internet Explorer. > > For example, play a YouTube video for 10-15 seconds and stop it with either > the stop button or alt+F4 to close your browser. > > Now go back to Replay Media Catcher application and you should be focused on > the list view. > > The list view will display your recordings/captures/downloads you have in a > list view style. > > Playback a file that is located within the list view. > > Locate the listview. If you do not see it. > > Press enter on the Library module/tab . > > Tab key a few times on the main UI and you will find the display list view > button. Press enter. > > OR > > Press alt+l for the Library toolbar and make sure display listview is checked. > > Locate the list view contents on main interface with the tab key. When you > find it your recordings/downloads will show up in the list view. > > Press shift+F10 on a file in the listview. > > You can do > > Delete a file. > > Rename > > Remove > > Play > > Move To > > Convert > > Save to MP3 > > Fix FLV > > Restart > > Show in folder > > Properties > > Cancel > > So to play a file press shift+F10 while on a file in the listview and choose > PLAY in the context menu. > > If you are asked to download a player to play a file it is your judgement to > decide what to do here but if you've played that file type before than choose > NO when the pop up message appears. > > You can play your files through the Windows Explorer. > > Where are my files? > > On main UI press enter on Library module/tab. > > Press alt+l. > > Choose open strorage folder. > > Conversion Setting > > If you want Replay Media Catcher to auto convert everything to a particular > format then do, > > On the main UI press enter on Library module/tab. Press your tab key a few > times and locate the No Conversion Settings > > Next press your spacebar key and down arrow key and you will hear the context > menu with submenus, > > Media Players > > Phones > > Tablets > > Game Consoles > > Manufacturers > > Formats > > Output Folder > > Don't Convert > > Configure > > Import into iTunes > > Example, choose the Formats submenu and right arrow to open it. Choose the > format you desire within this list and press enter. > > I chose MP3 Default in this list and press enter. > > Tab over to Ok and press enter. > > Now when you are back on the main UI of Replay Media Catcher 5 you will see > the format type you chose instead of No Conversion Type displayed. > > If you do not see this then tab one time and then shift+tab. > > For me it reads on the main UI Mp3 Defaults (MP3). > > We are telling Replay Media Catcher 5 to automatically convert all > captures/recordings/downloads whether they are audio or video to MP3 format > in my example above. So if your video was .flv or mp4 Replay Media Catcher 5 > is going to convert to .mp3 and also keep the original file .flv or .mp4 also > as shown in this example. > > You will have the original file and the converted file in both the list view > and Windows Explorer. > > Example, > > WGN.flv > > WGN.mp3 > > How to Record Audio > > Choose Library tab on main user interface. > > Press your tab key a few times until you hear the Download from the Internet > button menu. > > Press spacebar key on Download from the Internet menu button. > > Press your down arrow key and when you hear Record Audio press your enter key. > > Record Audio is now the default. > > Tab over one time. > > You will hear Start Recording button. > > Press the Start Recording button with enter key. > > Play your media like with your browser. > > Your audio is being captured. > > To view what is being captured go to the Replay Media Catcher Library list > view contents. > > When done close your browser. > > To stop recording press the stop recording button. > > To change it back to Download from the Internet button menu simply spacebar > on Record Audio and down arrow to Download from the Internet and press enter. > > If you cannot escape from here then do an alt+tab anb shift+tab to go back to > Replay Media Catcher 5. > > You will notice that the Start Recording button has changed back to Click To > Start Monitoring For Downloads button when Download from the Internet is > active. > > Developer wrote > > RMC5 is a different product, with a modern interface and far more features > than anything AV or RMC4 had. > > Understanding Replay Media Catcher > > Below where it reads 'selected' means to press your keyboard enter key on the > module/tab. > > Settings / Conversion Settings / Display Listview / Open Storage Folder menu > item is under the Library menu which is displayed when the main Library > tab/module is selected > > Shortcut is > > alt+l > > Start/Stop recording menu item is under the Internet menu which is displayed > when the main Internet tab/module is selected. Internet menu/toolbar shortcut > is > > alt+i > > New Schedule menu item is under the Schedule menu which is displayed when the > Schedule tab/module is selected > > Shortcut is alt+s > > New - this is where you set timer style recording. > > Edit > > Copy > > Delete > > Run Now > > Most menu items have keyboard short cuts where it makes sense > > The Schedule Module/Tab and how to set a scheduled recording. > > On Main UI press enter on Schedule Module/tab. > > Use tab key to find the schedule for a future time button on main UI. > > Press ENTER kER key. > > Schedule window > > To find your list of scheduled future recordings you must be in the Schedule > module/tab. > > So on main UI of Replay Media Catcher 5 find the schedule module/tab and > press enter key. > > Then tab until you find the Scheduled list view contents. Here you will see > your list of scheduled recordings you have set for a future time period. > > > ----- Original Message ----- > From: Janie Landrum > To: blindreplay@xxxxxxxxxxxxx > Sent: Sunday, December 08, 2013 12:22 PM > Subject: [blindreplay] Re: My Audio Tutorials > > Hi, Can you please email me your audio tutorial link for replay media catcher > version 188.8.131.52.9. I am having trouble getting mine to work properly. I have > been using replay catcher for years and love it. But this version is giving > me trouble. Any help would be appreash > > Sent from my iPhone > >> On Dec 8, 2013, at 11:33 AM, "Petro T. Giannakopoulos" <petrogia@xxxxxxxxx> >> wrote: >> >> Hi All >> Will be removing my audio tutorials on December 8 from Dropbox which will >> mean the Dropbox links will not work when they are clicked on. I will put >> these audio tutorials back up on Monday, December 9.