Re: [artworks] Printing problems from Artworks
- From: Eddie <riscos@xxxxxxxxxxxxxxxxxxx>
- To: artworks@xxxxxxxxxxxxx
- Date: Wed, 04 Feb 2009 17:15:19 GMT
In message <876b122850.tim@xxxxxxxxxxxxxxxxxx>
Tim Powys-Lybbe <tim@xxxxxxxxx> wrote thus:
> In message of 3 Feb, Eddie <riscos@xxxxxxxxxxxxxxxxxxx> wrote:
>>> I had written:
> <snip>
>>> 3. Curiously I transferred the same PDF file to the host Mac (host to
>>> VARPC) and it displayed the PDF file well. But printing it just had
>>> a mid-red hue all over the paper, with the image faintly below.
>>
>> Just tried the AW file you posted, converted to pdf and txfred from my
>> Iyo to my Mac. The pdf displays OK in Mac Preview and also prints OK
>> from the Mac (To a Kyocera colour laser).
>>
>> Not sure if it helps but there you go:-)
> It is of enormous help in my campaign not to use Windows if I can help
> it! And I was surprised that preview printed it OK while Adobe Reader
> (on the Mac) did not. I had specifically downloaded Adobe Reader in the
> (mistaken) view that it must be better!
My pleasure. One of the nice things about the Mac is that pdf handling
is very good. And I avoid abode reader too, if I can. All my
TechWriter manuals after 'printing' as pdfs, then are tested in
Preview. It was often a very good way of checking if the TW structures
were OK.
--
Kind Regards
Eddie
Never interrupt your enemy when he is making a mistake. - Napoleon
------------------------------------------------------------
To change, suspend or cancel your subscription go to
//www.freelists.org/list/artworks
------------------------------------------------------------
Other related posts:
