Anthony: What's their price on non spec AP?
On Fri, Mar 24, 2017 at 2:06 PM, Charlie Garcia <dragonrider.hhcc@xxxxxxxxx>
wrote:
While we're on the topic of precursors, RCS is out of their 2.38% HX752 +
HTPB. Does anyone else sell similar supplies?
On Fri, Mar 24, 2017, 4:00 PM Anthony Cesaroni <acesaroni@xxxxxxxxxxx>
wrote:
5000-pound tote bins. 200 microns.
Anthony J. Cesaroni
President/CEO
Cesaroni Technology/Cesaroni Aerospace
http://www.cesaronitech.com/
(941) 360-3100 x101 <(941)%20360-3100> Sarasota
(905) 887-2370 x222 <(905)%20887-2370> Toronto
*From:* arocket-bounce@xxxxxxxxxxxxx [mailto:arocket-bounce@xxxxxxxxxxxxx]
*On Behalf Of *William Claybaugh
*Sent:* Friday, March 24, 2017 3:48 PM
*To:* arocket@xxxxxxxxxxxxx
*Subject:* [AR] Re: hybrids (was Re: List of universities ...)
In what size lots?
Thanks,
Bill
On Fri, Mar 24, 2017 at 12:46 PM Anthony Cesaroni <acesaroni@xxxxxxxxxxx>
wrote:
FYI, spec. AP from the only manufacturer left in the U.S. now runs well
over $20.00/pound.
Anthony J. Cesaroni
President/CEO
Cesaroni Technology/Cesaroni Aerospace
http://www.cesaronitech.com/
(941) 360-3100 x101 <(941)%20360-3100> Sarasota
(905) 887-2370 x222 <(905)%20887-2370> Toronto
-----Original Message-----
From: arocket-bounce@xxxxxxxxxxxxx [mailto:arocket-bounce@xxxxxxxxxxxxx]
On Behalf Of Norman Yarvin
Sent: Thursday, March 23, 2017 1:50 AM
To: arocket@xxxxxxxxxxxxx
Subject: [AR] Re: hybrids (was Re: List of universities ...)
On Wed, Mar 22, 2017 at 03:13:17PM -0400, Henry Spencer wrote:
On Wed, 22 Mar 2017, Norman Yarvin wrote:
I'm guessing that the chemistry is exotic enough that the cost of the
cartridge metal is in the noise.
I can't answer for what Anthony's crew is currently using -- "exotic"
is an inadequate word for some of the things they work with -- but you
can, I believe, make reasonable gas-generator fuels with quite ordinary
combinations like AP/rubber. You just put in considerably less AP than
you would for a solid -- enough that it will ignite and stay ignited,
but not nearly enough to burn all the fuel. (Whereas the usual solid
mix is more or less "all the AP you can possibly cram in without
hopelessly compromising the mechanical properties".)
Ack, yes; those were the lines along which I was thinking, but I got the
sign wrong (thinking it harder rather than easier). Even so, it's not like
ammonium perchlorate is all that much cheaper than aluminum.
