[argyllcms] Re: spyd2: Get Reading failed with ICOM err 0x100
- From: "Torsten Kunkel" <WarEagle@xxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Sat, 11 Oct 2008 22:02:40 +0200
Hi Graeme,
> Seems like some problem with USB. Is the Spyder plugged directly into
> the computer (ie. not via a hub) ? Have you tried various USB ports
> on your computer ? (The Spyder is known to have problems with USB).
Yes I tried different settings:
* direct to my onboard-usb-bus
* direct to my pci-usb-adaptor-card
* through an activ usb-hub
I'm using argyllcms with the libusb for windows, it recognizes the spyder
without problems:
bus-0/\\.\libusb0-0002--0x085c-0x0200 085C/0200
- Manufacturer : ColorVision Inc.
- Product : ColorVision Monitor Spyder
wTotalLength: 25
bNumInterfaces: 1
bConfigurationValue: 1
iConfiguration: 4
bmAttributes: 80h
MaxPower: 50
bInterfaceNumber: 0
bAlternateSetting: 0
bNumEndpoints: 1
bInterfaceClass: 255
bInterfaceSubClass: 0
bInterfaceProtocol: 0
iInterface: 5
bEndpointAddress: 81h
bmAttributes: 03h
wMaxPacketSize: 8
bInterval: 10
bRefresh: 0
bSynchAddress: 0
Are there any specific settings I have to set? I guess not, because I found no
hint on this.
--
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer
Other related posts:
