Hello Stefan and Graeme: I copy the two files befere running your wrapper, now colprof.exe runs smoothly.From my preliminary test, I find that "2d boundary of ICC profile not smooth"
problem that I reported bofore is gone with V1.3.3. That is, the boundary of ICC profile from V1.3.3 becomes smooth. So this solves the two problems that I have. Thanks a lot! tmwu-----原始郵件----- From: Stefan - ooge.com
Sent: Tuesday, April 19, 2011 11:20 PM To: argyllcms@xxxxxxxxxxxxx Subject: [argyllcms] Re: compiling V1.3.3beta on win7 Fixed! (as far as i can see ...) if i runn the shell as administrator (as Graeme says) the .log's looks fine. (i made a small .bat with only "cmd" inside, this i click with right mouse and "Run as administrator" change to the right directory and start wrapper.bat ... ) all compiled new .exe missing the "libgcc_s_dw2-1.dll" from MinGW\bin just copying to Argyll_V1.3.3_beta_\bin :) btw. i got tmwu's errors within makeall.log but as far as i see the resulting .exe are ok ... even the libusb-1.0A.lib copy works but brings up this strange error tmwu, just try to copy "libusb-1.0A.lib" to your Argyll_V1.3.3_beta_\bin may this is all you need ... best, Stefan Am 19.04.2011 14:00, schrieb Graeme Gill:
Stefan - ooge.com wrote:copy /b libusb1\libusb\libusb-1.0A.lib + nul libusb1\libusb-1.0A.lib > nul ...failed File_ libusb1\libusb-1.0A.lib ...What happened there ? Is there a permissions problem in creating libusb1\libusb-1.0A.lib ? (ie. the directory or an exisisting copy that is read only ?)Archive numlib\libnum.lib ar: numlib\dhsx.obj: No such file or directoryWhere's your numlib/dhsx.c gone ? Graeme Gill.