[argyllcms] Re: Re-aligning *it1 files to be read on vertical orientation
- From: Ong Choon Keong <tasdevil55@xxxxxxxxxxx>
- To: <argyllcms@xxxxxxxxxxxxx>
- Date: Mon, 12 Aug 2013 22:20:16 +0800
No problem - I managed to use a longer ruler for this. Thanks a lot -
appreciate it!
Regards
-----Original Message-----
From: argyllcms-bounce@xxxxxxxxxxxxx [mailto:argyllcms-bounce@xxxxxxxxxxxxx]
On Behalf Of Graeme Gill
Sent: Monday, August 12, 2013 8:39 AM
To: argyllcms@xxxxxxxxxxxxx
Subject: [argyllcms] Re: Re-aligning *it1 files to be read on vertical
orientation
Ong Choon Keong wrote:
> Not sure if I'm doing the right thing, but it's not working. Keeps
> giving me the "not enough patches" error.
Without your .ti2 it's hard to know why. Was that an error that comes up
immediately, or did it occur partway through ?
I tried with a simple single sheet profile using chartread -p with the
method I described, and it seemed to change the patch order the way you
wanted.
The other approach is to use a different ruler that will let you read longer
strips.
Graeme Gill.
Other related posts:
